Diploma in Biomedical Engineering Technology (Co-op)

at Northern Alberta Institute of Technology Canada

NAIT’s 1-year Dental Assisting certificate program will give you the knowledge and skills necessary for direct entry to dental practice. From infection prevention and control to all chairside restorative and specialty procedures, as well as direct patient care and dental practice administration, our program will prepare you to be an integral member of the dental health care team.

Hands-on, industry-relevant training
Our training approach emphasizes practical experience backed by strong theoretical knowledge in the skills and technology necessary to be a successful Dental Assistant. Our program features the following:

•  38-week full-time program: two 15-week semesters and an 8-week intersession.
•  Small group learning, which allows for the optimum student-to-instructor ratio
•  Practical, hands-on approach to learning in labs, as well as through clinical placements within the dental community
•  Providing treatment to both peers and the general public in our fully equipped onsite dental clinic

NAIT's Radio and Television programs are 2 distinct, yet interrelated full-time diploma programs. Each of these dynamic 2-year programs takes a non-traditional approach to teaching that will provide you with learning opportunities through hands-on experiences.

Undertake the typical job functions found in radio and television stations by acting as the staff for NAIT's campus radio station (NR92) and television newsroom (NAIT NewsWatch). Using industry standard digital equipment and labs, and while working in modern studios, you'll hone written, technical, communicative and production competencies.

Our instructors are highly-qualified professionals with years of industry experience and our program is well-recognized across the country. If you flip on your TV or radio at any given time, you're likely to see or hear NAIT alumni working across North America.

Technology like computers, robots, lasers, fibre optics, artificial intelligence and satellite communications all use microelectronic technology.

In this program, you will gain the ability to solve technical and scientific problems with these and other technologies, while learning principles of electricity, embedded systems, communications, industrial electronics and problem solving skills. You'll also learn fault and failure isolation (troubleshooting) skills that are applicable to the immediate needs of employers.

The program emphasizes practical skills and state-of-the-art applications to ensure immediate applicability to the needs of industry.

Hands-on, industry relevant skills:-
Through an emphasis on practical skills that you can take straight to industry, the Electronics Engineering Technology will help you gain a comprehensive understanding of the principles of electricity, microcontrollers, communications, control systems and industrial electronics. You'll be given the opportunity to design and develop complex electronic systems and find solutions to real-world problems. 

The world is rapidly becoming an accessible knowledge marketplace. Global networks capable of carrying voice, data, graphics and interactive video are a reality. The economic viability of some local and international business is inextricably dependent upon this technology.

This program will provide graduates with advanced skills in analyzing, optimizing, maintaining, implementing and administering computer networks. Emphasis will be placed upon practical skills and state-of-the-art implementations to ensure immediate applicability to industry requirements.

NAIT's Construction Engineering Technology program will provide you with a broad knowledge of the management, estimating and technical aspects of construction, with a primary focus on commercial and residential buildings and related support industries.

You'll develop your drawing interpretation, detail sketching and site surveying skills. You'll also be shown the ins and outs of project planning, contract administration and sub-trade coordination so you can advance your career into site leadership and project management.

The Construction Engineering Technology program works with a program advisory committee made up of industry experts who ensure the program provides students with the knowledge and skills currently required by employers. The program is also accredited by the Canadian Construction Association Gold Seal Certification program and by the Association of Science and Engineering Technology Professionals of Alberta (ASET).

The Personal Fitness Trainer program combines the hands-on practice of physical training and safe exercise with the knowledge of nutrition and lifestyle counselling to create one of the most in-demand fitness programs in Alberta.

NAIT’s Personal Fitness Trainer faculty have an average of 20 years of industry experience and the program incorporates business management and marketing practices for entrepreneurial graduates that want to start their own fitness empire.

The Personal Fitness Trainer program is offered online and in-class.

A comprehensive study of electrical principles and practices, this nationally accredited program deals with the operation of electrical and electronic equipment, specialized testing equipment and computer software. NAIT's Electrical Engineering Technology is a nationally accredited and internationally recognized program that provides a comprehensive study of electrical principles and practices. The program will provide graduates with the skills to perform entry-level roles in several industry disciplines, including power systems operation and protection, maintenance and commissioning, electrical machines, industrial and commercial design, power electronics, and programmable logic controllers (PLCs).

Technologists will also learn critical skills and experience in:

• The structure, operation, protection and control of electrical power generation, transmission and distribution systems and electrical motors
• The planning, design and specification of power, lighting, control and communication systems in buildings and industrial plants
• Control of plant systems and motors through the use and application of PLCs and variable-frequency drives (VFDs) and the application of communications technology linking these various plant systems
• Researching, writing and presenting technical reports

An electrical engineering technologist should possess an aptitude toward math and physics applications. In addition to electrical and technical abilities, the technologist relies upon good written and verbal communication skills and the ability to work within a team environment in a dynamic workplace.

To be successful, electrical engineering technologists need:

• Analytical skills
• Experience using recent technology
• Oral and written communication skills
• Ability to work in teams
• Basic electrical design
• Basic maintenance knowledge

Upon completion of the program, Electrical Engineering Technology graduates will have the ability to:

• Communicate and conduct themselves professionally in a workplace environment
• Identify safety hazards and implement safe work practices
• Create and interpret engineering design packages
• Analyze and troubleshoot electrical circuits and systems
• Perform entry-level field service activities
• Configure and test protection, control and communication devices and systems.

Graduates from this program will satisfy the academic requirements and be eligible for membership with The Association of Science and Engineering Technology Professionals (ASET) and other ASET affiliated associates. With emphasis on engineering fundamentals combined with high-tech equipment and analysis techniques, the program provides the flexibility and portability of skills required by mechanical engineering technologists. Design concepts, process planning and analysis techniques are studied and students receive sound supporting theory from courses such as Dynamics, Design of Machine Elements, Drafting and CAD, Plant Engineering and others.

Prospective students usually have an appreciation for engineering principles with a strong leaning toward creativity and practicality. To be successful, graduates must possess:

• Sound people and personal skills, including working as a team player
• Effective listening and written communication skills
• Attention to detail
• Personal initiative
• Professionalism with colleagues and customers
• A commitment to lifelong learning
• A mechanical aptitude to assist in problem-solving and design

This program is designed to prepare graduates for rewarding careers in a wide range of industrial and government positions. Our students are employed in all aspects of Alberta industry that use or sell machinery. The majority of graduates get jobs in industries related to oil and gas, agriculture and wood products. Students with a journeyman background are particularly employable.

The Management program is for people who want to lead in business, industry, government and not-for-profit sectors. Students will benefit from our business case studies, industry guest speakers and in depth instruction.

Hands-on, industry-relevant skills:-
In your first year of the program, you will take 10 foundational courses that set you up with core business knowledge. In your second year of studies, you will take the required courses to get a specialized diploma in management.

This program develops you as a leader, whether in organizational management positions or key advisor roles. We will help you develop an understanding of modern business dynamics and organizational culture. We teach management skills including accounting, finance and marketing knowledge to foster decision-making in a competitive environment. Upon graduation, you will have the skills and knowledge required for entry to mid-level positions, which will open doors to senior-level management. 

Hands-on learning:-
We immerse students in a combination of classroom teaching, industry-relevant case work, simulations and networking. You will develop an understanding of modern business dynamics and learn to work well within culturally diverse organizations.

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

In the Visual Communications area of emphasis, learn how to create high-quality, eye-catching products by applying advanced design principles.

What You Will Learn
Hands-on, industry-relevant skills
The Visual Communications area of emphasis will give you the skills you need to be a professional graphic designer. Courses will focus on 2 core software tools that will help you accomplish this goal: Adobe Photoshop and Adobe Illustrator.

Supplemental courses will teach you the practical and theoretical sides of visual design, such as colour theory, typographic history and the art of telling a story using characters and images. To round out the program, you will also take time developing a portfolio and learning the business side of this industry.