Associate in Applied Science - Parks and Recreation

at MSM Group - Spokane Community College USA

The Automotive Collision and Refinishing Technician program teaches the skills necessary to succeed in the automotive collision repair industry.  Instruction is primarily in a shop situation where field conditions are simulated.  Students are able to learn by demonstration and direct hands on experience.

Students are instructed in a wide range of skills, including welding, sheet metal repair and replacement, fabrication and restoration techniques, frame and unibody repair, as well as repair and replacement of structural components.

The refinishing portion of our program provides students with a comprehensive education in modern refinishing techniques and materials, as well as material and damage estimation. Students will learn all phases of substrate preparation, color matching and application of the latest paint materials including water born products.

Learning Outcomes

• Understand the characteristics of metal and the principles of metal correction.
• Repair damaged bodies, frames, suspensions and sheet metal; remove and replace glass.
• Refinish complete vehicles and spot damaged areas with the latest in refinishing products and equipment.
• Estimate damage costs.
• Understand automotive electrical principles and minor services.
• Weld (wire feed) to industry standards.
• Understand basic shop operation.
• Understand hazardous waste management.
• Demonstrate shop safety practices.

Approved courses in both airframe and powerplant mechanics are offered to meet the Federal Aviation Administration requirements. General aircraft courses offered the first two quarters are prerequisites to both the airframe and powerplant phase of the program. Students receive a well-rounded education in general aircraft mechanics the first two quarters of the program. Third- and fourth-quarter course offerings include both lecture and lab courses in airframe repair, and fifth- and sixth-quarter offerings include lecture and lab courses in powerplant repair. Courses to satisfy the requirements for an AAS degree will be by arrangement.

Graduates of the program are eligible to take the FAA examination for both the Airframe and Powerplant licenses. A minimum of 1,900 attendance hours is required to take these exams.

Learning Outcomes

• Qualified to take the FAA general, airframe, and powerplant tests.
• Able to perform the duties of a beginning certified mechanic with entry level skills in the repair, maintenance, inspection and overhaul of airframe and of aircraft powerplants, including electrical systems, sheet metal, welding, hydraulic systems, rigging and assembly, wood, fabric and finishes, propellers, ignition systems, lubrication systems, and general overhaul procedures.
• Able to use tools, equipment, methods, and procedures in repair, maintenance, and inspection of aircraft and powerplants.
• Able to meet the requirements for an AAS degree from Spokane Community College.

From smart phones to autonomous cars, electronic technology is an integral and constantly changing part of our world. An Electronics Engineering Technician degree provides the foundation necessary to pursue a career in this exciting field.

This lab intensive program provides practical, hands-on experience with a variety of equipment used in the industry. Classes are designed to develop the skills necessary to help engineers develop new electronic products and to evaluate, test, troubleshoot, and repair existing products. Graduates find employment with a wide variety of companies including electronic equipment manufacturers, medical equipment manufacturers, service companies, and hospitals.

To qualify for an associate in applied science degree, students must successfully complete seven quarters of study. The first five quarters are common to all the electronics programs. Students then choose to specialize in Avionics, Applications, or Mechatronics.

Learning Outcomes

• State the characteristics of electronic components and circuits.
• Calculate circuit parameters.
• Demonstrate proper safety procedures.
• Construct electronic parameters.
• Use electronic test equipment to evaluate and troubleshoot electronic circuits.
• Explain career related regulatory requirements.

The Automotive Technology program prepares students for employment in many areas of the automotive field including dealerships, independent garages, fleet shops, service stations, and specialty shops which cover areas such as tune-ups and brakes. Students may enter the program only in the first quarter. The one-year certificate requires completion of any three quarters of the Automotive Technology program and the four related classes identified in footnote 1. This flexible schedule also enables students to receive short-term certificates while pursuing their degree. Students must complete all courses with a 2.0 grade or better before advancing to subsequent quarters.

Learning Outcomes

• Describe how an automotive heating, ventilation, and air-conditions system works.
• Discuss the refrigerants used and their impact on the environment.
• Explain airflow management and sensors and actuators used.
• Comprehend the refrigerant recycle importance and effects on the environment.
• Discuss engine constructions, energy and power of an engine.
• Discuss compression ratio, torque and horsepower.
• Discuss synthetic engine oils and their advantages.
• Discuss hybrids engine precautions.
• Learn theory and principles of computerized engine controls, automotive exhaust emissions, and fuel injection and ignition systems.
• Working knowledge of the brake system and component identification.
• Basic knowledge of the diagnostic process of the brak system.
• Working knowledge of the suspension system and component identification.
• Working knowledge of the alignment equipment and basic adjustments.
• Principles of late model automatic transmissions, transaxles and sub-assemblies.
• Operation of automotive manual transmissions and transaxles, differential, transfer case, drive line, and constant velocity joints.

The Marketing program is designed for students who want to specialize in fields involved with the distribution of goods and services from producer to consumer. Students take core business courses followed by marketing specialty courses such as marketing, retailing, advertising and international business. Students are also required to gain work experience as part of the program. There is opportunity for teamwork and leadership experience through participation in college DECA, international management and marketing organization.

All students graduating from this program must have a minimum grade of 2.0 on each of the management; accounting; economics; and general business required courses. Students must also have a 2.0 cumulative grade point average on all required courses in the program.

Learning Outcomes

• Understand the position of contemporary marketing within the economy and recognize how it fits into the global economy and the world of e-commerce.
• Analyze strategies and tactics to develop a balanced marketing mix to reach targeted market groups in both the consumer and business to business sectors in order to create satisfied customers.
• Analyze and understand the elements of the marketing mix, which includes having the right products/services in the right place at the right price with proper promotion to position a product/service to reach the targeted groups.
• Understand how the functions of marketing (buying, selling, transporting, storing, standardization and grading, financing, risk taking, marketing research) support the marketing mix.
• Understand and appreciate how outside environmental forces (technology, political legal, competition, social cultural, economic) influence changes in a firm’s marketing mix.
• Understand the need for market information systems, understand consumer/buyer behavior and market segmentation.
• Understand the need to support marketing goals with management skills, communication skills, human relation skills, and ethical behavior.

Electrical maintenance and automation technicians are responsible for the maintenance, testing, repair, and/or replacement of the electrical systems and controls found in modern industrial plants and large commercial buildings.

As the electrical systems become more sophisticated, so must the skills of the electrical maintenance and automation technician. By mixing the theoretical with practical hands-on lab experiences using modern up-to-date industrial equipment and techniques, the student will be prepared for a challenging career in electrical maintenance.

Learning Outcomes

• Understand the inherent dangers of and be able to work safely around electricity.
• Be familiar with electrical theory, electrical terms and electrical circuits (AC & DC).
• Able to identify common electrical materials, parts, and components.
• Understand the theory, operation, and maintenance of AC & DC generators and motors.
• Know basic electronic theory and components.
• Able to design, wire, and troubleshoot conventional motor control circuits.
• Demonstrate proper transformer connections and understand the operation of industrial lighting.
• Able to perform electrical conduit bending using trigonometric calculations.
• Understand and apply the fundamentals of the National Electrical Code.
• Understand pneumatic system theory, math, symbols, and circuits.
• Understand hydraulic theory, components, symbols, and circuits.
• Demonstrated ability to work in the electrical power industry through the documented work experience approved bby the cooperative education supervisor and/or the Bonneville Power Administration.

Cosmetology is a diverse field that offers a variety of employment opportunities. SCC's Cosmetology program provides the education and training needed to successfully compete in today's job market. Upon successful completion of the 1,600-hour program, students are prepared to take the Washington State Examination of Cosmetology. After passing this exam, they will be qualified to receive a license for Cosmetology.

This program includes hair cutting, trimming of facial hair, hair styling, permanent waving, chemical relaxing, tinting and bleaching, and temporary superfluous hair removal; artificial hair; manicuring and pedicuring of natural nails; basic skincare and theory of diseases and disorders of the scalp, skin, hair, and nails; and anatomy as it relates to cosmetology. In addition, safety and sanitation measures are stressed throughout the program. Students also must complete a first aid class. Students will be given review testing and simulated performance evaluations in preparation for the state licensing examination.

Learning Outcomes

• Demonstrate and formulate entry level haircutting techniques.
• Demonstrate and formulate entry level hair color techniques and practices.
• Demonstrate basic manicuring.
• Demonstrate basic skin care.
• Demonstrate and formulate entry level chemical texturizing services.
• Work with minimum supervision in a salon.
• Recognize the importance of, and practice good public relations with customers, employers, and fellow employees.
• Skillfully use tools and equipment safely and in a sanitary manner.
• Demonstrate the ability to successfully complete the state required practical examination for licensure.
• Demonstrate the ability to successfully complete the state required written examination for licensure.

From smart phones to autonomous cars, electronic technology is an integral and constantly changing part of our world. An Electronics Engineering Technician degree provides the foundation necessary to pursue a career in this exciting field.

This lab intensive program provides practical, hands-on experience with a variety of equipment used in the industry. Classes are designed to develop the skills necessary to help engineers develop new electronic products and to evaluate, test, troubleshoot, and repair existing products. Graduates find employment with a wide variety of companies including electronic equipment manufacturers, medical equipment manufacturers, service companies, and hospitals.

To qualify for an associate in applied science degree, students must successfully complete seven quarters of study. The first five quarters are common to all the electronics programs. Students then choose to specialize in Avionics, Applications, or Mechatronics.

Learning Outcomes

• State the characteristics of electronic components and circuits.
• Calculate circuit parameters.
• Demonstrate proper safety procedures.
• Construct electronic parameters.
• Use electronic test equipment to evaluate and troubleshoot electronic circuits.
• Explain career related regulatory requirements.

The CAD Design and Drafting program prepares students with the skills necessary for drafting and design using both CAD drafting and solid modeling techniques. The course of study prepares students to work in a wide range of engineering disciplines, including engineering teams for large and small manufacturing firms, consulting engineering firms, testing, and research companies to gain employment as computer-aided drafters and engineering designers.

Students not only learn to draft using CAD and solid modeling techniques, but also get “hands-on” practical experience in 3D printing, engineering design projects, and by learning fabrication processes used in industry. Coursework includes a balance of basic skills in math and communications, as well as a practical application of relevant computer-assisted drafting skills in several engineering disciplines, including mechanical, civil and structural engineering; mechanical design in building systems; electrical and fluid power schematics; and fabrication/piping drafting.

Learning Outcomes

• Use the systems, symbols, language and mechanics of the drafting field.
• Skillfully apply computers and engineering office software for documentation, communication, design, and drafting.
• Identify, solve, and apply engineering calculations relevant to a full drafting and design project.
• Work productively in a team environment and/or as an independent drafter/designer when required.
• Work with the sense of responsibility and accuracy required in the field of engineering design and drafting.
• Develop individual and full sets of drafting projects including shop drawings, assembly drawings, schematics, and construction plans using 2-D CAD and 3-D CAD solid modeling.
• Create accurate solid model computer files to transfer to rapid prototypes, CNC use, shop drawings, or engineering designs.
• Identify and select appropriate materials and processing of materials used in industry for a design project.
• Demonstrate basic shop practices in woods, metals, plastics, and composites, including machining, fabrication/welding, assembly and testing for design prototypes.
• Demonstrate global awareness of the impact of efficiency, effectiveness, cost, and sustainability in design.

Basic and advanced procedures in food preparation are included in the two-year Culinary Arts program. A detailed study is made of the various cooking methods for meats, fish, poultry, vegetables, soups and sauces. Menu terminology and cooking terms are defined and illustrated. Students are given the opportunity to study management factors affecting food cost control, specifications and standards for foods, sanitation, kitchen planning, kitchen equipment, and personnel policies.

Learning Outcomes

• Prepare and serve food in a first class restaurant environment.
• Develop menus listing menu items for a food service operation.
• Practice safe and sanitary work habits in a first class restaurant establishment.
• Produce menu items accurately from standardized recipes.
• Order, purchase and store foods in a commercial kitchen facility.
• Inventory food products.
• Operate commercial kitchen machinery in a safe manner.
• Calculate the costs of a standardized recipe.
• Prepare fine desserts for a first class restaurant.
• Hire and supervise kitchen employees.