Diploma in Nursing

at Central Queensland University - Rockhampton, City Campus Australia

The Master of Engineering allows you the opportunity to develop professional skills such as teamwork and communication while applying and further developing the theoretical knowledge you gained in your undergraduate study. If you are a practicing engineer, this is a versatile course that allows you to extend or expand your engineering practice.  

This course begins with an introduction to Australian engineering practice, providing the opportunity to apply discipline knowledge and skills in an authentic project, in some cases with an industry mentor, and will help to prepare you for engineering practice. You will then complete an internship of a minimum of 300 hours to gain work experience required to meet the accreditation requirements of the course. If you have significant and recent engineering experience (at least 480 hours) you may opt out of this unit and choose an elective unit as an alternative.

Depending on your choice of elective units, you will study one or two units from topics including sustainability, mining, project management and rail providing the opportunity to contextualise your learning to your current or preferred industry. Finally, you will complete a major research project that will demonstrate your ability to work as a professional engineer.

CQUniversity’s Bachelor of Education (Early Childhood) is an initial teacher education course usually studied over a period of four years. This course qualifies you for professional registration which is administered in Queensland by the Queensland College of Teachers. You will demonstrate evidence of meeting the Australian Professional Standards for Teachers (Graduate Career Stage) throughout the course of study. On successful completion of the course, you will be eligible for employment in primary schools from Prep to Year 6 and in early childhood settings (long day care settings & kindergartens/pre-prep) throughout Australia.

In addition to building the professional knowledge and skills required to teach effectively, the course is designed to foster dispositions for engaging in and contributing to the teaching profession through a commitment to ongoing professional learning.

The Bachelor of Education (Early Childhood) also includes a specialisation in English providing you with knowledge and skills in this specialisation area. Students located in the Rockhampton Diocese, if selected to be part of the program, can undertake a specialisation in Catholic Education allowing you to be accredited to teach in a Catholic School.

As a graduate of the Bachelor of Education (Early Childhood) you can progress to postgraduate study courses that are available for registered teachers through CQUniversity.

To be eligible for teacher registration, students in this course are required to undertake and pass the National Literacy and Numeracy Test for Initial Teacher Education Students (ITE) prior to graduation. This test, referred to as LANTITE, is administered Nationally by the Australian Council of Education Research (ACER).

The agricultural industry is faced with new and emerging challenges creating a need for graduates who have practical experience, knowledge of cutting-edge technology and the leadership potential to help drive adoption of innovation at every stage of primary production. The Bachelor of Agriculture prepares you for the rigours of the ‘real’ world and ensures graduates are skilled to make a difference in the context of the emerging opportunities that a high tech agricultural industry provides.

The course delivers the right mix of skills-based training and research-led teaching to succeed in today’s agribusiness, livestock and cropping industries. Thanks to our partnership with local industry, such as Victoria’s Rural Industries Skills Training (RIST), you’ll benefit from project-based training on extensive crop, dairy, sheep, equine and beef production facilities. Graduates from RIST can apply for direct entry into the Bachelor of Agriculture.

The first year of the Bachelor of Agriculture will provide the foundation framework that you will use to develop increasingly complex learnings developed in the context of industry-relevant problems. In the second year, you will build your core skills by developing your systematic thinking by learning about emerging agricultural innovation through an industry placement. You will select to complete either a major in agribusiness or two out of three minors in livestock, cropping or business, during the course. In your third year, you will acquire information about agricultural practices and technology and develop advanced-level technical and people-management skills. You will complete the course by producing a real-world consulting project that will address a client-driven whole-of-system problem.

The Bachelor of Medical Science aims to develop your skills to apply knowledge of Clinical Measurement, Nutrition or Pathology to clinical practice in a health professional role, or Biotechnology in support industries and medical research.

The course is designed to build a high level of technical and evaluative skill so you can assess and implement recommendations for best practice in patient testing, monitoring, education or to develop therapeutics in the cutting-edge medical biotechnology or pharmaceutical industry. The course also aims to develop high level communication skills so that you can interact positively with patients/clients, other health professionals or industry leaders and are ready for the clinical or scientific work environment.

Clinical decision making and problem solving ability will be promoted through opportunities such as developing skills in designing, conducting and interpreting medical research.

Biotechnology

The biotechnology specialisation will explore the ways in which living things and their molecular constituents are used as tools. With an emphasis on medical applications, you will be ideally placed to pursue a career in the BioPharma industry and medical diagnostics. Please note this major is only available at our Rockhampton campus.

The Bachelor of Engineering Technology is designed to develop your skills and enable you to combine an understanding of engineering concepts with modern technology. Choose between major options, allowing you to pursue a career as an Engineering Technologist in traditional engineering disciplines, or an aircraft maintenance engineer.

If you choose to study the civil, electrical or mechanical majors, your education and training will equip you with the skills to innovatively apply, modify and adapt engineering practices to meet engineering challenges and problems for communities, society and the environment. Tailor your course by choosing from a wide range of streams to suit your personal interests and career goals. View the majors and minors section below for more information on the streams contained within each major.

You will have the opportunity to engage with practicing engineers, work on industry-sponsored projects and have access to industry-based scholarship offered by some of Australia's leading companies. Nine weeks of industry placement during the course also allows you to apply your skills and increase your employability by gaining on-the-job experience.
If you are interested in the aircraft maintenance (avionics) major, you will benefit from our partnership with Aviation Australia and an accelerated pathway to reach Licence Aircraft Maintenance Engineer (LAME) status where you will cover all the competencies of the European Union Aviation Safety Agency (EASA) approved Aviation Australia Diploma of Aircraft Maintenance Engineering (Avionics) and foundations of professional engineering.

CQUniversity's Bachelor of Education (Secondary) will prepare you as a well-rounded graduate that qualifies for professional registration as a teacher throughout Australia.

The course includes 125 days of planned teaching practice in secondary schools plus other opportunities for you to apply theoretical knowledge in practical ways. You will also develop the skills required to teach effectively in a wide range of contemporary educational settings.

During your studies, you will choose two teaching disciplines to focus on, such as biology (including year 7–10 science), business, chemistry (including year 7 to 10 science), English, geography, health and physical education (including year 7–10 HPE and year 11–12 physical education), history, home economics and hospitality, industrial technology and design, mathematics and psychology.

Study the Bachelor of Nursing and gain the knowledge and skills needed to become a Registered Nurse (Division 1). This course prepares you to be reflective about your practice as a nurse and develop clinical reasoning skills in order to confidently and safely engage in contemporary nursing practice in a variety of environments and contexts and adapt to the needs of people from diverse backgrounds.

Through this course, you will acquire skills to provide person-centred care and collaborate with other members of the interdisciplinary healthcare team. You will seek evidence to ensure safe quality practice and act in a professional, ethical and compassionate manner. In addition, you will learn to nurture the development of nursing as a practice discipline and demonstrate leadership in healthcare. You will explore how life-long learning skills can facilitate continuing professional development.

Clinical learning is a key element of the Bachelor of Nursing and you will be required to undertake 800 hours of professional experience placement in a variety of settings with different health organisations. You must meet specific mandatory health, safety and security requirements to be eligible to attend each professional experience placement. Professional experience placements may be limited in your community. This means that you may be placed in other locations and you may be required to relocate to complete your placements.

Occupational therapy is a dynamic person-centred health profession. Practitioners support people of all ages, and their families, to engage in the occupations and activities of daily life, to optimise physical and mental health and wellbeing. Occupational therapists must be registered to practice in Australia, and may work in a range of government, educational, and industry settings, as well as in private enterprise, throughout the world.

The aim of our accredited Occupational Therapy Course is to develop highly competent and autonomous occupational therapy graduates, skilled in inter-professional and person-/family-centred occupational therapy practice. To achieve this, the course is informed by contemporary research and occupational therapy theories and models. It is taught by occupational therapists and other suitably qualified professionals who are skilled and experienced in the diverse areas of occupational therapy practice. Although it addresses local, national, and global community needs, a particular emphasis is on training graduates to work in rural and regional communities. The occupational therapy course aligns seamlessly with CQUniversity's focus on social innovation and status as Australia’s first Ashoka U Changemaker Campus.

Your education and training will include recognising aspects relevant to the person, the environment, and occupations that represent strengths and barriers to occupational engagement; and addressing these to support people to achieve their goals. You will engage in a minimum of 1000 hours of clinical practice, including full-time placements, for which you will need to meet a number of prerequisite requirements. In your final year, you will further develop your skills by planning and implementing a small community-based research or evaluation project enabling you to graduate work-ready.

While completing the Bachelor of Medical Laboratory Science (Honours), you will build technical and evaluative skills to assess and implement recommendations for best practice in patient testing, monitoring and education.

You will also develop an advanced level of communication skill to ensure positive interactions with both patients and other health professionals.

This course will enable you to develop an advanced level of communication skill to interact positively with patients and other health professionals ready for the clinical or scientific work environment. Clinical decision-making and problem-solving abilities are key skills for the medical laboratory scientist.

Through opportunities in professional practice, case-based studies and research projects, you will develop clinical decision-making and problem-solving abilities to enable you to successfully perform your duties as a medical laboratory scientist upon graduation.

This qualification reflects the role of workers in the community and/or residential setting, who follow an individualised plan to provide person-centred support to people who may require support due to ageing, disability or some other reason. Work involves using discretion and judgement in relation to individual support as well as taking responsibility for own outputs. Workers have a range of factual, technical and procedural knowledge, as well as some theoretical knowledge of the concepts and practices required to provide person-centred support. This qualification has specialisation pathways of ageing, disability, home and community. To achieve this qualification, the student must have completed at least 120 hours of vocational placement as detailed in the assessment requirements of the units of competency. The unit CHCCCS023, Support independence and well being, links with the vocational placement.  

This is a nationally recognised accredited course.