Diploma in Chemical Engineering Technology

at Northern Alberta Institute of Technology Canada

Petroleum Engineering Technology is a two-year diploma program that prepares the graduate for employment in the upstream petroleum industry. The expanding oil sands development sector also provides tremendous opportunities for Petroleum Engineering Technology graduates.

The Petroleum Engineering Technology program was profiled in Project President, where NAIT President Dr. Glenn Feltham was shown how to start up and operate the pilot plant, which resembles a real-life natural gas sweetening plan, typical activities that students will do.

Careers that leave a lasting impact
Have a passion for building? Civil Engineering Technology is a 2-year diploma program or 2-and-a-half year co-op diploma program through which you’ll learn how to design and manage construction, infrastructure and research projects.

Our curriculum has been developed with industry input to ensure we cover all of the theoretical and practical elements that are essential within the broad field of civil engineering. With the help of hands-on learning and supportive, experienced instruction, you’ll apply computer-aided design & drafting (CADD) systems to civil engineering problems in the areas of:

• Structural design
• Urban services design
• Highway design
• Pavement design
• Geotechnical design
• Project management
• Applied research

Chemical Engineering Technology is a two-year diploma program that prepares the graduate for employment in the hydrocarbon and chemical processing industry (downstream petroleum industry). The program deals with the processing of oil, natural gas and bitumen into final products such as motor gasoline, diesel or jet fuel, propane, butane, utility gas and others. The program includes the study of the production of secondary petrochemicals such as ethylene, vinyl chloride, methanol and others.

Veterinary medical assistants provide support to clients, animal health technologists and veterinarians. Duties may include administration, animal handling and support with nutritional and pharmaceutical products. They also assist with record keeping and other clinical procedures and tasks.

This 1-year certificate program will provide you the skills and confidence you’ll need to work in a front-line position as a veterinary medical assistant in private veterinary clinics, livestock centres and animal shelters. In addition to classroom instruction, you’ll get in-depth knowledge and hands-on experience in animal clinics across Alberta.

Good attention to detail? Thrive on a fast pace and heavy workload? These are important traits of people interested in this program. If you are a people person and enjoy helping them with their animals, this program is a good fit for you.

What You Will LearnCareer 
Hands-on, industry-relevant training
To work as a veterinary medical assistant, you will need to have a genuine interest in animals and their welfare. It’s important to understand that you will need to be comfortable working with a variety of animals, both large and small.

After a year of classroom instruction, your clinical placement will give you hands-on experience at an animal clinic where you’ll get a taste of what your future career could look like. Travel may be necessary as some placements are outside of Edmonton.

You will also regularly support the animal health technologists at the NAIT Animal Clinic. 

As a student in the program, you can expect to spend on average:

• 26 hours per week attending classes over the course of a semester 
• 15 to 20 hours per week studying and completing class assignments

Look around you – virtually every printed, silk screened and digitally-rendered display you see every day has moved through the hands of a graphic communications professional.

NAIT's intensive 1-year Graphic Communications certificate program will prepare you for entry into the creative and rapidly evolving digital, print and publishing industry. You'll take projects from the creative planning stage through graphic design, digital file creation, customer proofing and final output. You can also expect to gain practical, hands-on experience with industry-standard software and equipment, and get the opportunity to complete a wide range of projects you're likely to encounter in industry.

Before all this, you'll develop a firm understanding of theoretical concepts and methods that are critical in the various press, bindery and large-format processes that follow digital file creation. This technical knowledge is what sets NAIT's Graphic Communications program apart from other technical institutions.

What You Will Learn
Hands-on, industry-relevant skills
The program has an excellent reputation among the Capital Region’s business community; classroom projects often involve design assignments relevant to their current ventures. Direct industry experience is gained through the program’s two-week professional experience component, allowing eligible students the opportunity to apply their technical and interpersonal skills effectively within a workplace environment.

The graphics industry is constantly undergoing change, whether it is new software developments, updates in output equipment and technologies, or trends in design elements. The program is in constant contact with industry and supply representatives to be sure the training demands are being met and grads have the skills necessary for employment. Skills acquired in this program have allowed our graduates to seek employment opportunities all across North America.

This nationally recognized program provides a wide range of training and will give you the skills necessary to make full or partial dentures, repair crowns, bridges and orthodontic appliances. You’ll learn the art and science of creating corrective devices for natural teeth and tissues.

A dental technologist is a master of their craft and an essential member of the dental-health team. To be successful, you’ll need to display meticulous attention to detail and an equal combination of technical skills and artistry.

What You Will Learn
Hands-on, industry-relevant training 
Throughout the program, you’ll recreate the appearance of natural teeth in fixed restorations such as crowns and implant restorations using porcelain, metal alloys and ceramic materials. For corrective devices like orthodontic appliances, you’ll learn the physical and biological forces of handling waxes, wires and acrylic materials.

You’ll have an individual workstation in the dental lab, complete with the latest industry-standard equipment, like:

• press ceramic furnace
• digital laboratory scanner
• acrylic injection system
• pressure thermal-forming machine

You can expect to spend, on average

• 32 hours per week attending classes over the course of a semester
• 10-15 hours per week studying and completing class assignments

The healthcare industry continues to see a rapid increase in the usage of advanced medical diagnostic and therapeutic equipment to provide the highest level of patient care possible. As our dependence on high-tech equipment and technical expertise required by medical professionals increases, so have the technology-related risks to patients and clinical staff.

Biomedical engineering technologist careers have evolved to help manage technology-related risks in the health-care industry through the entire lifecycle of medical devices, including specification, inspection, calibration, repair and maintenance, and technical troubleshooting.

The Biomedical Engineering Technology program will provide you with fundamental knowledge and hands-on experience with electronics, microcontroller applications, computer network systems and medical imaging systems. You'll also become familiar with medical laboratory practices, anatomy, physiology and health technology management.

What You Will Learn
Hands-on, industry-relevant training
The Biomedical Engineering Technology program will provide you with the skills of an electronic technologist with a specialized focus on biomedical equipment technology.
In your first year of study you will learn about electronics, microcontroller programming, math and computer systems. 

• Biomedical instrumentation
• X-ray and diagnostic imaging equipment
• Medical laboratory instrumentation

Supplementary courses in anatomy and physiology and medical equipment management complete the medical specialization.

Co-op
Students may be eligible to participate in a one semester co-op placement between their first and second year of training. Successful co-op students work in a program related, industry position and gain advanced job-readiness skills. Acceptance into co-op requires successful completion of first term coursework with a GPA of 2.3. 

The Industrial Heavy Equipment Technology diploma program with teach you how to diagnose and repair machinery in the heavy equipment industry competently and safely. The program focuses on highway and off-highway mobile equipment, as well as engine-powered stationary equipment used in mining, logging, trucking, agriculture, gas processing, oilfield servicing and construction.

Industries including mining, logging, trucking, agriculture, transportation, gas processing, oilfield servicing and construction are all in-demand for heavy equipment service personnel with an advanced level of technical training to tackle the challenge of advancing technology.

What You Will Learn
Hands-on, industry-relevant training
Industrial Heavy Equipment Technology is a two-year diploma program consisting of four 15-week semesters. Studies include

• Fluid mechanics
• Petroleum chemistry
• Fuel and hydraulic systems
• Electricity and electronics
• Fleet maintenance
• Communications
• Leadership

The training is divided equally into theoretical and practical learning. Local industrial field trips will be taken.

Train at NAIT
Students can expect to spend, on average

• 30 hours per week attending classes over the course of a semester
• 10 to 12 hours per week studying and completing class assignments

Training is provided at NAIT Main Campus in Edmonton. Some training is also delivered in the NAIT HET Building (11940 - 109 st NW), just north of Main Campus. Labs are fully equipped with mock-ups and training aids, which students disassemble, inspect and reassemble.

As a registered medical laboratory technologist, you will assist in the diagnosis, treatment and prevention of disease. In this program the focus will be on the analysis of human blood and body fluids for microorganisms and cellular and chemical components. Compatibility testing of blood and blood products, plus preparation of tissue samples for microscopic examination.

What You Will Learn
Hands-on, industry-relevant training
Medical Laboratory Technology focuses on the analysis of human blood, body fluids and tissues, with students learning a variety of skills to become entry level professionals. This program includes general laboratory related courses with progression to discipline specific courses in Microbiology, Transfusion Science, Hematology, Clinical Chemistry, and Histotechnology.  Goals of the program include the following:

• Teaching students how to provide quality patient care by being introduced to:
  • How to work safely in a level II containment laboratory
  • How to collect and process specimens for analysis
  • How to analyze, interpret & report quality laboratory results
  • How to think critically and how to communicate and collaborate inter-professionally
• Teaching students the professional responsibility of a registered MLT, including scope of practice, ethics, accountability, and professional development.
• Preparing students for clinical training by providing theoretical knowledge and hands-on experiences
• Preparing students for the CSMLS national certification exam

The MLT program is divided into two phases where students will learn and practice the skills required to be a registered MLT 

Phase I of the Medical Laboratory Technology program begins every September and consists of 49 weeks of classroom instruction with related practical laboratory sessions on NAIT Main Campus. This includes (two) 15-week semesters, (one) 4-week intersession, followed by one additional 15-week semester.

Phase II consists of 38 weeks of Work Integrated Learning (WIL) at one of three affiliated training sites in Edmonton, Grande Prairie or Red Deer. WIL provides practical experience in a variety of clinical settings. Emphasis is placed on practical application of concepts studied at NAIT and on development of organizational, critical thinking, and professionalism skills.

The focus of this program is the accommodation and food and beverage segments of the hospitality industry. Students gain business and customer service skills in food and beverage service techniques, front desk check-in procedures, financial accounting, economics and written communications. The Hospitality Management program is a two-year course of study which provides students with the skill sets and abilities required to work in the hospitality industry. The program focuses on service skills for food and beverage, catering and front-desk operations with specific courses in hospitality law. The second year examines marketing, financial management, supervisory skills and advanced courses in hotel, restaurant and catering operations. A 400-hour work experience term is also included.

The program is also built around traditional business subjects such as business communications, accounting and organizational behaviour. Courses are delivered through lab and lecture formats beginning with supervisory skill development and progressing toward more complex management functions. The Hospitality Management program provides training and skill development in:

• business communications
• food and beverage service
• banquets and catering service
• operations management
• front-desk principles and procedures
• hospitality law
• supervisory principles and procedures
• organizational behaviour
• computer applications
• introduction to marketing
• introduction to accounting
• general tourism knowledge

Graduates of the Hospitality Management program may find employment in a variety of sectors and positions within the tourism industry, as:

• food and beverage servers
• food and beverage supervisors
• food and beverage managers
• banquet and catering supervisors
• front-desk supervisors
• front-desk managers
• front-desk agents
• night auditors
• reservations agents
• entrepreneurs
• consultants