Certificate in Graphic Communications

at Northern Alberta Institute of Technology Canada

An animal health technologist (Veterinary technologist) is a valuable member of the animal health-care team who performs a large range of tasks, such as nursing care, diagnostic procedures and client interactions, to assist veterinarians in the diagnosis, treatment and prevention of disease in animals. The program focuses on practical skills used in both small and large animal practices, including lab work, radiographs and medical and surgical nursing.

What You Will Learn
Hands-on, industry-relevant training

You can expect to spend, on average:

•     30 hours per week attending classes over the course of a semester
•     8 to 10 hours per week studying and completing class assignments

You’ll train in NAIT’s Animal Health Clinic, which provides basic veterinary services for dogs and cats owned by NAIT staff and students. It’s here where you’ll receive hands-on experience in procedures that include spays and neuters, vaccinations and teeth cleaning.

As an Animal Health Technology student, you must handle ill or injured animals of all shapes and sizes. You’ll travel to farms and animal hospitals and treat more than just dogs and cats. To be successful in this program – and career – having a genuine interest in the treatment of all animals is a must!

The Advanced Plumbing Technology diploma is a unique opportunity to get the technical and career essential skills you need to succeed in the plumbing industry. The diploma program offers a direct pathway into trades training at NAIT without having to first be a registered apprentice and can also serve as a pathway to apprenticeship.

The program focuses on theory and hands-on training required to master installation, repair, perform mechanical system maintenance and more. You will learn specific technical knowledge and get hands-on skills and experience. You will also get to explore new technologies and systems such as water recycling and re-use, solar and geothermal heating systems and water conservation.

Industry-approved training
A career in plumbing calls for an understanding of both technical knowledge and career essential skills. Learning outcomes for this program include:

• Industry standards, legislation and workplace expectations
• Design, installation and maintenance of all relevant systems, including:
  • Gas systems
  • Hydronic heating systems and gas appliances
  • Potable and non-potable water systems
  • Service drainage, waste and vent (DWV) systems
• Design, interpretation and conversion of drawings for plumbing installations
• Mathematical concepts for plumbing installations, and
• Effective written and verbal communication tools

The program content and structure aligns with Alberta Credential Framework expectations. After completing the program, you will have the technical training comparable to a journeyperson plumber.
After completing the program, you will be eligible to enter into an apprenticeship and complete apprenticeship hours to receive a journeyperson’s certificate.

The Industrial Heavy Equipment Technology diploma program with teach you how to diagnose and repair machinery in the heavy equipment industry competently and safely. The program focuses on highway and off-highway mobile equipment, as well as engine-powered stationary equipment used in mining, logging, trucking, agriculture, gas processing, oilfield servicing and construction.

Industries including mining, logging, trucking, agriculture, transportation, gas processing, oilfield servicing and construction are all in-demand for heavy equipment service personnel with an advanced level of technical training to tackle the challenge of advancing technology.

What You Will Learn
Hands-on, industry-relevant training
Industrial Heavy Equipment Technology is a two-year diploma program consisting of four 15-week semesters. Studies include

• Fluid mechanics
• Petroleum chemistry
• Fuel and hydraulic systems
• Electricity and electronics
• Fleet maintenance
• Communications
• Leadership

The training is divided equally into theoretical and practical learning. Local industrial field trips will be taken.

Train at NAIT
Students can expect to spend, on average

• 30 hours per week attending classes over the course of a semester
• 10 to 12 hours per week studying and completing class assignments

Training is provided at NAIT Main Campus in Edmonton. Some training is also delivered in the NAIT HET Building (11940 - 109 st NW), just north of Main Campus. Labs are fully equipped with mock-ups and training aids, which students disassemble, inspect and reassemble.

A comprehensive study of electrical principles and practices, this nationally accredited program deals with the operation of electrical and electronic equipment, specialized testing equipment and computer software. NAIT's Electrical Engineering Technology is a nationally accredited and internationally recognized program that provides a comprehensive study of electrical principles and practices. The program will provide graduates with the skills to perform entry-level roles in several industry disciplines, including power systems operation and protection, maintenance and commissioning, electrical machines, industrial and commercial design, power electronics, and programmable logic controllers (PLCs).

Technologists will also learn critical skills and experience in:

• The structure, operation, protection and control of electrical power generation, transmission and distribution systems and electrical motors
• The planning, design and specification of power, lighting, control and communication systems in buildings and industrial plants
• Control of plant systems and motors through the use and application of PLCs and variable-frequency drives (VFDs) and the application of communications technology linking these various plant systems
• Researching, writing and presenting technical reports

An electrical engineering technologist should possess an aptitude toward math and physics applications. In addition to electrical and technical abilities, the technologist relies upon good written and verbal communication skills and the ability to work within a team environment in a dynamic workplace.

To be successful, electrical engineering technologists need:

• Analytical skills
• Experience using recent technology
• Oral and written communication skills
• Ability to work in teams
• Basic electrical design
• Basic maintenance knowledge

Upon completion of the program, Electrical Engineering Technology graduates will have the ability to:

• Communicate and conduct themselves professionally in a workplace environment
• Identify safety hazards and implement safe work practices
• Create and interpret engineering design packages
• Analyze and troubleshoot electrical circuits and systems
• Perform entry-level field service activities
• Configure and test protection, control and communication devices and systems.

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

The Game Design area of emphasis teaches you how to plan and create video games from concept through to creation.

Hands-on, industry-relevant skills:-
In the DMIT - Game Design program, you will get first-hand experience designing, building and assembling a working prototype of a game level. You will learn the art and technical aspects involved in creating and implementing visual game assets, such as environments, characters, vehicles, cameras and special effects. Courses will also focus on developing story and audio.

Some of the specific tools you will learn to use include 3D Studio Max, Unity 3D and Adobe Photoshop and Illustrator.

You will leave this program prepared to enter the industry, armed with practical experience and a well-crafted portfolio that highlights your talent.

The NAIT Advanced Care Paramedic program prepares graduates for a rewarding and challenging career in providing emergency medical services to the sick and injured. Advanced Care Paramedics are members of the inter-professional health care team, working collaboratively with other emergency medical personnel, physicians, nurses, and other health professionals. They primarily provide care of patients at emergency scenes in the pre hospital care setting, but can also have roles in emergency departments and other settings within an acute care hospital setting. They are responsible for assessing a patient’s condition to determine the extent of his or her injury or illness and immediate care needs, and providing treatment that includes advanced life support procedures, airway management, medication administration, tending to traumatic injuries, intravenous catheterization, bandaging, splinting, suturing child birth, mental health crisis interventions, and more. Patient care often includes initial stabilization of the patient and transport via ambulance to health care facilities for further treatment.

Demands of the job and practicum training as a student include standing, reaching, walking, crouching, bending, and lifting of heavy equipment, as well as exposure to stressful emergency situations where patients are critically ill or injured, and quick decisions must be made in managing the patient and delegating roles to first responders. There are also risks for exposure to chemicals, bodily fluids, needle sticks, moving traffic, weather conditions.

The NAIT Advanced Care Paramedic program utilizes facilities at NAIT, active treatment hospitals, and ambulance services to train and prepare students for graduation and employment.

 What You Will Learn
Hands-on, industry-relevant training

In this 2 year diploma program you will build on your prior learning as a primary care paramedic and learn about providing advanced emergency care, including assessment and treatment of patients with a variety of medical disorders and injuries. Your learning environment will consist of lectures, labs, clinical simulations and practicum. Areas of learning will be focused on but are not excluded to:

• Human anatomy, physiology and pathophysiology
• Advanced life support skills including medical and trauma management
• Pharmacology
• Child birth and neonatal care
• Pediatric patient care
• Diverse patient populations
• Professionalism, inter professionalism, and medical legal aspects

You will also be trained in physical and mental health self-care, to ensure you are prepared for a demanding patient care environment.

Practicum will consist of placement with ambulance services and a variety of acute care hospitals. You will be expected to work shifts including evenings, nights and weekends, and you may be required to travel outside of Edmonton for your practicum placement.

The first year of the program consists of lectures, labs and clinical simulations. The second year of the program consists of some lectures, labs and clinical simulation in advanced courses, as well as approximately 1200 hours of practicum.

You can expect to spend, on average:

• 28 hours per week attending classes over the course of a semester
• 15 to 20 hours per week studying and completing class assignments
• 40 hours per week on practicum

Instrumentation Engineering Technology (IET) is a nationally accredited program that provides a comprehensive course of studies in industrial measurement and control.
With a provincial economy that is largely industrial-based, instrumentation has become an extremely important field. Industries are also becoming increasingly automated to improve productivity, conserve energy, and reduce pollution. This has created a strong demand for trained professionals in the instrumentation technology field across industries ranging from industrial automation and electronics to oil and gas.

In the Instrumentation Engineering Technology program, you can expect to gain the knowledge and skills needed for a successful career in instrumentation technology. The program involves detailed studies of the principles and application of pneumatic, electronic, and microcomputer measurement and control systems.
Access to state-of-the-art laboratories and a hands-on approach to learning provide students with job-ready experience.

Skills you will acquire
Over the course of the program, you will learn how to:

• Apply principles of process control to analyze and optimize the performance of industrial processes.
• Install and maintain process instruments.
• Install and maintain analytical instruments and sampling systems.
• Configure and troubleshoot industrial  controllers.
• Install, program and troubleshoot industrial controllers.
• Design and specify measurement, safety and control systems for industrial applications.
• Use computer hardware and software relevant to instrumentation.
• Work in a safe and professional manner following regulatory and industry specific work practices.
• Communicate effectively through written and verbal means.
• Use tools appropriate to the instrumentation field in a safe and effective matter.
• Participate as a member of an effective team

Practicum/Co-op/Work Experience
Students may be eligible to participate in a 4 or 8 month co-op placement once they complete all level 1 courses, and before they complete all the level 2 courses. Successful co-op students work in a program-related industry position and gain advanced job-readiness skills. Acceptance into our co-op program is based on successful completion of first term coursework with a minimum GPA of 2.7.

Denturists are dental health professionals who specialize in the field of removable oral prostheses (dentures). Denturists work in partnership with other health professionals to deliver comprehensive treatment.

The Denturist Technology program offers a challenging career for those individuals interested in providing direct patient care in oral health services. The program is designed to provide students with the theoretical, technical and clinical experiences required to assess, diagnose, design, fabricate and insert both complete and partial removable dentures.
This three-year program prepares students to assess, diagnose, design, fabricate, insert complete and partial dentures and provide effective communication with patients regarding treatment options and care. An extensive clinical practicum makes up Year 3.

The healthcare industry continues to see a rapid increase in the usage of advanced medical diagnostic and therapeutic equipment to provide the highest level of patient care possible. As our dependence on high-tech equipment and technical expertise required by medical professionals increases, so have the technology-related risks to patients and clinical staff.

Biomedical engineering technologist careers have evolved to help manage technology-related risks in the health-care industry through the entire lifecycle of medical devices, including specification, inspection, calibration, repair and maintenance, and technical troubleshooting.

The Biomedical Engineering Technology program will provide you with fundamental knowledge and hands-on experience with electronics, microcontroller applications, computer network systems and medical imaging systems. You'll also become familiar with medical laboratory practices, anatomy, physiology and health technology management.

What You Will Learn
Hands-on, industry-relevant training
The Biomedical Engineering Technology program will provide you with the skills of an electronic technologist with a specialized focus on biomedical equipment technology.
In your first year of study you will learn about electronics, microcontroller programming, math and computer systems. 

• Biomedical instrumentation
• X-ray and diagnostic imaging equipment
• Medical laboratory instrumentation

Supplementary courses in anatomy and physiology and medical equipment management complete the medical specialization.

Co-op
Students may be eligible to participate in a one semester co-op placement between their first and second year of training. Successful co-op students work in a program related, industry position and gain advanced job-readiness skills. Acceptance into co-op requires successful completion of first term coursework with a GPA of 2.3. 

The Bachelor of Business Administration (BBA) with Management emphasis equips students who want to lead in business, industry, government and not-for-profit sectors. Students in the Management degree emphasis are prepared for leadership roles where they can make a difference by advising on key business practices like revenue streams, resourcing and strategic planning. You'll be challenged through simulated business cases, sound reasoning, analytical thinking, and inductive thinking to make decisions moving organizations forward towards greater success. Much of the instruction in this emphasis is centered on real-world cases, and you'll be given opportunities to work directly with industry. All management-related courses have prerequisites, so it is important to carefully plan the order your studies.