Diploma in Respiratory Therapy

at Northern Alberta Institute of Technology Canada

Overview

Respiratory Therapists are dedicated to the diagnosis, treatment, rehabilitation and education of patients with heart and lung disorders. As a Respiratory Therapist, you’ll work with patients of all ages, from infants and children to adults and geriatrics. The Respiratory Therapist is a crucial life-saving and life-supporting professional, and as a NAIT graduate you’ll be well equipped to work in a wide variety of hospital and health care settings.

What You Will Learn
Hands-on, industry-relevant training
Learn to plan and implement diagnostic procedures for patients suffering from a wide range of heart and lung disorders. This 3-year diploma program will feature simulation experience, with classroom and lab instruction, combined with clinical rotations in various hospital settings. The program features hands-on training in areas such as:

  • Human anatomy, physiology, pharmacology and pathophysiology
  • Airway management and cardiopulmonary testing, monitoring and resuscitation
  • Assessment of cardio-respiratory patient status; ventilator support; testing and evaluation of respiratory equipment

You can expect to spend, on average:

  • 27 hours per week attending classes over the course of a semester.
  • 10 to 15 hours per week studying and completing class assignments.
  • Upon successful completion of the RET program the graduate is eligible to challenge the Canadian Board for Respiratory Care (CBRC) entry-to-practice certification examination to become a registered respiratory therapist.
  • In order to practice as a Respiratory Therapist in the province of Alberta, technologists are required to be registered with the College and Association of Respiratory Therapists of Alberta to obtain a license to practice.
Read More

30

Application Processing Days

Under Graduate

Program Level

Fact & Figures

Full Time On Campus

Study Mode

36

Duration

Northern Alberta Institute of Technology

Location

Diploma in Respiratory Therapy Assistant Fee

$27810

Tuition Fee

$11000

Average Cost of Living

$115

Application Fee

Diploma in Respiratory Therapy Admissions Requirements

  • Minimum Level of Education Required: To be accepted into this program, applicants must have Grade 12 / High School Diploma or equivalent including the following required course(s):
    • English 30-1 or English 30-2 70%
    • Math 30-1 or Math 30-2 or Applied Math 30 70%
    • Biology 30 70%
    • Chemistry 30 70%
plane

Get superfast admissions at top Diploma in Respiratory Therapy institutes in 2024

Benefits of choosing

edmission

Admission’s guaranteed at Top institutes across the world.

Enjoy exclusive application fee waiver’s with Edmissions.

Unlimited FREE Counselling sessions with Edmission’s Experts

Get Tips from industry veterans to crack the IELTS exam in 1 week.

Assistance with scholarships, loans, forex, student accommodation and visa guidance.

Where would you like to study*

Work Permit Canada

Students who wish to work in Canada require a work permit to do so. A student in Canada can work part-time during the course of his studies and full-time during holidays and semester breaks and post the completion of their course/program.

Rules for getting a part-time work visa in Canada

You can also work part-time on campus at your university.

Work Permit

Duration

Your part-time work permit will be valid for as long as you have a valid study permit.

Working Hours

20 Hours/Week

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

List

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

Study Permit

You will need a Social Insurance Number (SIN) to Service Canada. if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

You can work part-time off-campus if you are studying in the Quebec province.

Duration of Work Permit Canada

Your part-time work permit will be valid for as long as you have a valid study permit.

Work Hours Canada

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

You will need a Social Insurance Number (SIN) to Service Canada if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

Working after completing your course

In Canada, you will need a work permit to get a full-time job in Canada after finishing your studies. You chose a work permit like the Post-Graduation Work Permit (PGWP) if you wish to stay back in Canada and work full-time.

Visit Government of Canada Website for more detail

Post-Graduation Work Permit (PGWP)

The Post- Graduation Work Permit (PGWP) allows you to work for three years in Canada if you have completed a two years degree or more.

Application

how can i apply

You can either apply online or download the form and mail the application along with the required documents. Pay your fee and then wait for the decision to come.

Application Documents Required

List

To apply for the work visa, you need a degree from a recognized and accredited Canadian University along with an intention to stay and work in Canada only temporarily.

When to Apply?

One can apply for the full-time work permit in the first three months post the completion of their course during which the study permit is still valid.

How long does it take?

90 days

You will have to wait for 90 days for the decision on your work permit.

Duration

3 Years

The work permit is valid for 3 years if you have completed a two years degree program or more.

Fees

CAD 255

The fee for the work permit is CAD 255 plus the holder fee and the work permit processing fee.

Monthly Wages

CAD 1,600

An applicant is guaranteed a minimum salary of CAD 1,600 per month while working in Canada. This amount though varies on the job and the province you are working in.

Work Hours Canada

No Limit

There is no maximum limit, and you can work for as many hours as you want on the full-time work permit.

Required Documents

List

To apply for the work visa, you will need the following documents:

  • Forms: IMM 5710, IMM 5476 and IMM 5475;
  • Graduation Proof
  • Proof of payment of work permit fees
  • Copies of your travel and identification documents, passport pages and current immigration document.

Till a decision is made on your work visa, you can continue to work full time. All you need to have is your completed degree, should have applied for the permit before the expiry of your study permit and you should be allowed to work off-campus.

Information

Disclaimer

The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

Detailed Program and Facts

30

Application Processing Days

Full Time On Campus

Program Intensity

Under Graduate

Program Level

36

Duration

Study Visa

Student Visa For Canada

Any student who wishes to study in Canada requires a student visa. Some of the essential information for the application process is given below.

When Should I Apply?

4 to 6 months

Ideally, one should apply for the study permit at least 4 to 6 months before the commencement of your course/program.

Bank Account

No Need!

There is no need for a blocked bank account to apply for a student visa to Canada.

Duration of visa

Course Duration + 3 Months

The student visa is valid for the entire period of your course plus three months.

Time to Wait for Visa

35 Days

It takes time. It might take up to 35 days post your interview for the application process to complete and for you to finally receive your visa.

Appointment

Required

It varies from applicant to applicant, but one may have to take part in one or two visa appointments, namely a medical examination and a visa interview.

How you can apply

Application Process

An applicant can either apply online or offline by visiting a visa application centre and submitting their documents. After the analysis of your application, you might be called for an interview.

Fee

Visa Fee

The visa application fee for Canada is CAD 150.

Minimum Funds

833 CAD, 917 CAD

You require a minimum monthly amount to be deposited into your account to prove that you can sustain yourself while studying in Canada. If you are studying in Quebec, you need to have a monthly minimum of CAD 917, and if you are studying in a province except for Quebec, you need to have a minimum of CAD 833 per month.

Any other expenses

Required

You will have to pay a medical examination fee and a visa application service fee to the tune of CAD 15 if you visit a visa application centre to apply for your visa.

Medical Examination

Required

One has to undergo a series of medical examinations to be deemed fit for a student visa of Canada. The tests mostly include blood and urine tests, chest x-rays and other organ checkups.

Language Skills

Not Required

one doesn’t need to prove their language skills in applying for a Canadian Visa.

Disclaimer: The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

English Test Requirement

7.5

Minimum Overall Score

8.0

Minimum Listening

7.0

Minimum Reading

7.0

Minimum Writing

7.0

Minimum Speaking

102.0

Minimum Overall Score

Other Courses by Northern Alberta Institute of Technology,Canada

You are curious about technology and its endless possibilities. You like to challenge yourself to find a solution to a problem. You want to be the go-to desktop or server support guru for technical advice. You are fascinated by cloud computing and how it works. This is a great way to jump into the field of technology because you’ll learn how to support secure servers and network infrastructures using on premise and cloud technologies. Come and join the dynamic and exciting field of technology! CNA – Supporting IT!

Hands-on, industry-relevant skills:

The Computer Network Administrator (CNA) program provides students with the fundamental knowledge and hands-on technical skills required to be successful in today’s information technology world. The CNA program teaches students foundational technology skills, core knowledge areas, and strategies for being successful. Students get specialized training with up-to-date applied technology.  

Through the course of the program, you can expect to learn:

  • PC fundamentals
  • Microsoft Windows server and client operations
  • Linux server and client operations
  • Virtualization
  • Cloud computing
  • Scripting and automation
  • Network infrastructure
  • Troubleshooting
  • Assessing and supporting end user needs
  • Supporting basic security policies and practices
  • Working effectively and ethically as an individual or member of a team

12 month

Duration

$ 20850

Tuition

The Bachelor of Business Administration (BBA) with Marketing emphasis prepares students to lead organizations in making decisions on corporate branding, public relations, sales, supply chain management and advertising in an immersive environment of critical thinking. The BBA degree with Marketing emphasis focuses on teaching consumer research, measurable strategies and strong communications skills. The goal is to develop your ability for strong analytical processes critical to the operation of business. Marketing emphasis students are led through business cases of ethics, consumer behaviour and sales management. These scenarios will help you understand the decision-making processes of business and think about the many factors that affect marketing campaigns and projects. All marketing-related courses have prerequisites, so it is important to carefully plan the order your studies. Students taking the BBA with a Marketing emphasis can expect to integrate their knowledge of marketing to support different organizational and multi-disciplinary goals in Canadian and international organizations.

48 month

Duration

$ 19410

Tuition

Technology like computers, robots, lasers, fibre optics, artificial intelligence and satellite communications all use microelectronic technology.

In this program, you will gain the ability to solve technical and scientific problems with these and other technologies, while learning principles of electricity, embedded systems, communications, industrial electronics and problem solving skills. You'll also learn fault and failure isolation (troubleshooting) skills that are applicable to the immediate needs of employers.

The program emphasizes practical skills and state-of-the-art applications to ensure immediate applicability to the needs of industry.

Hands-on, industry relevant skills:-
Through an emphasis on practical skills that you can take straight to industry, the Electronics Engineering Technology will help you gain a comprehensive understanding of the principles of electricity, microcontrollers, communications, control systems and industrial electronics. You'll be given the opportunity to design and develop complex electronic systems and find solutions to real-world problems. 

Additionally, this program will help you improve your:

  • Analytical thinking
  • Technical and scientific problem-solving skills
  • Oral and written communication skills
  • Interpersonal and teamwork skills

Co-op:-
This program offers the opportunity to participate in a one semester co-op placement between your first and second year of training. Successful co-op students work in a program related, industry position and gain advanced job-readiness skills. Acceptance into co-op is based on successful completion of first term coursework with a GPA of 2.3.

24 month

Duration

$ 23796

Tuition

You want to learn the skills and knowledge of conventional machining operations to utilize drill presses, lathes, milling machines and various grinding machines, including using Computer Numerical Control (CNC) programming, set up and operation. You will also receive introductory CAD/CAM training, as well as inspection and quality control training.
Successful completion of this 1-year certificate can allow you to challenge the first year apprenticeship exam for the Machinist program.

What You Will Learn
Hands-on, industry-relevant training

  • Graduates of the Computer Numerical Control (CNC) Machinist certificate are responsible for manufacturing components for the oil and gas, mining, forestry, construction and transportation industries. A CNC machinist will demonstrate trade specific skills in programming, setup and operation of computer controlled tools. Graduates will also perform competently when working with manual machine tools.
  • Machinists are able to work efficiently on their own and/or in team environments where problem-solving skills, critical thinking skills and current knowledge of technological trends and quality practices are essential to daily work. A graduate with a CNC Machinist certificate may be given the opportunity to apprentice in the machinist trade. This program has both fall and winter intakes.

Is this program for you?
To be successful as a machinist, you must have:

  • Good hand-working skills
  • Good problem-solving capabilities
  • Mechanical inclination
  • An ability to work well with others
  • Competence in math
  • Mature attitudes towards learning and work
  • During the first semester of the CNC Machinist certificate, you will receive training on manual machines such as engine lathes, milling machines, drill presses and grinders.
  • In the second semester, you will receive training on the operation, set up and programming of CNC (computer numerical control) turning and milling centres.
  • The final component is an 8-week  work placement, which gives you an opportunity to apply your skills and knowledge in an industrial setting by working in a machine shop.

 

12 month

Duration

$ 22041

Tuition

Health Sciences, Nursing and Emergency Services

Certificate in Dental Assisting

NAIT’s 1-year Dental Assisting certificate program will give you the knowledge and skills necessary for direct entry to dental practice. From infection prevention and control to all chairside restorative and specialty procedures, as well as direct patient care and dental practice administration, our program will prepare you to be an integral member of the dental health care team.

Hands-on, industry-relevant training
Our training approach emphasizes practical experience backed by strong theoretical knowledge in the skills and technology necessary to be a successful Dental Assistant. Our program features the following:

  •  38-week full-time program: two 15-week semesters and an 8-week intersession.
  •  Small group learning, which allows for the optimum student-to-instructor ratio
  •  Practical, hands-on approach to learning in labs, as well as through clinical placements within the dental community
  •  Providing treatment to both peers and the general public in our fully equipped onsite dental clinic

12 month

Duration

$ 23436

Tuition

Careers that leave a lasting impact
Have a passion for building? Civil Engineering Technology is a 2-year diploma program or 2-and-a-half year co-op diploma program through which you’ll learn how to design and manage construction, infrastructure and research projects.

Our curriculum has been developed with industry input to ensure we cover all of the theoretical and practical elements that are essential within the broad field of civil engineering. With the help of hands-on learning and supportive, experienced instruction, you’ll apply computer-aided design & drafting (CADD) systems to civil engineering problems in the areas of:

  • Structural design
  • Urban services design
  • Highway design
  • Pavement design
  • Geotechnical design
  • Project management
  • Applied research

24 month

Duration

$ 19890

Tuition

The Bachelor of Business Administration (BBA) degree with Accounting emphasis is designed to advance students beyond a solid working knowledge of accounting and information systems to learn quantitative analysis techniques critical to business success. Accounting emphasis students in the BBA are taught to make effective financial decisions, analyze and plan business processes and adapt to changing economic conditions. Students also develop skills in personal and corporate taxation, external auditing and accounting information systems. All accounting-related courses have prerequisites, so it is important to carefully plan the order of studies.

48 month

Duration

$ 19410

Tuition

Graduates from this program will satisfy the academic requirements and be eligible for membership with The Association of Science and Engineering Technology Professionals (ASET) and other ASET affiliated associates. With emphasis on engineering fundamentals combined with high-tech equipment and analysis techniques, the program provides the flexibility and portability of skills required by mechanical engineering technologists. Design concepts, process planning and analysis techniques are studied and students receive sound supporting theory from courses such as Dynamics, Design of Machine Elements, Drafting and CAD, Plant Engineering and others.

Prospective students usually have an appreciation for engineering principles with a strong leaning toward creativity and practicality. To be successful, graduates must possess:

  • Sound people and personal skills, including working as a team player
  • Effective listening and written communication skills
  • Attention to detail
  • Personal initiative
  • Professionalism with colleagues and customers
  • A commitment to lifelong learning
  • A mechanical aptitude to assist in problem-solving and design

This program is designed to prepare graduates for rewarding careers in a wide range of industrial and government positions. Our students are employed in all aspects of Alberta industry that use or sell machinery. The majority of graduates get jobs in industries related to oil and gas, agriculture and wood products. Students with a journeyman background are particularly employable.

24 month

Duration

$ 18576

Tuition

Have you already earned an IT-related diploma? You’ve configured, overcome challenges and provided solutions, you know how to make IT work, and are now ready to learn why IT works. You want to design and integrate complex network solutions. The BAIST program will provide the skills and knowledge to take you to the next level. BAIST – Designing IT!”

What You Will Learn
Network Management Major
This major involves highly specialized preparation geared toward managing the planning, installation and operations of computer networks in very large enterprises.  After graduation, you will be prepared for career opportunities as a network manager, network engineer or network administrator.

In this major you  will learn to:

  • Use network operating systems, management tools and protocol analysis tools
  • Design, analyze and manage networks, LANs and WANs
  • Manage advanced server configuration, network LAN and advanced WAN protocols, and network hardware resources
  • Provide network client support, and monitor and optimize network performance

24 month

Duration

$ 25956

Tuition

The Nanosystems Engineering Technology program is the only program of its kind in Canada. In it, you will be exposed to face-to-face, hands-on learning in our labs including in our specialized cleanroom facility.

In the program, you will learn about the fabrication and evaluation of micro- and nanomaterials and devices commonly used in a wide range of industries, such as health care, smart devices, and energy production and storage. You’ll learn how to operate systems and equipment used by nanotech researchers and manufacturing companies, such as the scanning electron microscope (SEM), which is used to obtain images of objects at the nanometre scale.

If you are seeking a multidisciplinary career in science and technology, this program will appeal to you. Nanosystems offers a growing number of high-tech and non-traditional career paths that will constantly challenge you with new and complex problems to solve.

24 month

Duration

$ 25164

Tuition

View All Courses by Northern Alberta Institute of Technology, Canada

Top Study Abroad Exams

GRE Exam

The Graduate Record Exam (GRE) is a necessary and popular enteryway exam that learners must pass in order to be acc.. Red More

GMAT Exam

The Graduate Management Admission Test (GMAT) is a well-know evaluation for being accepted into MBA programs. Per... Read More

SAT Exam

The SAT is a Standardized evaluation that is necessary for enrolling in underaduate cur... Read More

Popular Universities to Study Abroad

Study in Canada
Study in USA
Study in UK
Study in NZ
Study in India
Study in UAE

Explore Colleges and Courses in Canada

Popular States
Popular Cities
Popular Streams

Latest Blog Posts

Trending Blog Posts

edmission

Search, Shortlist, Apply and get accepted! It’s that Simple to pursue your dream to Study abroad with Edmissions. Our team of experts provide you the right guidance that helps you to take admission in your dream college in countries like Canada, the USA, the UK

© 2021-2024 Edmissions - All rights reserved.

TALK TO OUR EXPERTS

whatsapp