Bachelor of Business Administration - Accounting Concentration

at Northern Alberta Institute of Technology Canada

The focus of this program is the accommodation and food and beverage segments of the hospitality industry. Students gain business and customer service skills in food and beverage service techniques, front desk check-in procedures, financial accounting, economics and written communications. The Hospitality Management program is a two-year course of study which provides students with the skill sets and abilities required to work in the hospitality industry. The program focuses on service skills for food and beverage, catering and front-desk operations with specific courses in hospitality law. The second year examines marketing, financial management, supervisory skills and advanced courses in hotel, restaurant and catering operations. A 400-hour work experience term is also included.

The program is also built around traditional business subjects such as business communications, accounting and organizational behaviour. Courses are delivered through lab and lecture formats beginning with supervisory skill development and progressing toward more complex management functions. The Hospitality Management program provides training and skill development in:

• business communications
• food and beverage service
• banquets and catering service
• operations management
• front-desk principles and procedures
• hospitality law
• supervisory principles and procedures
• organizational behaviour
• computer applications
• introduction to marketing
• introduction to accounting
• general tourism knowledge

Graduates of the Hospitality Management program may find employment in a variety of sectors and positions within the tourism industry, as:

• food and beverage servers
• food and beverage supervisors
• food and beverage managers
• banquet and catering supervisors
• front-desk supervisors
• front-desk managers
• front-desk agents
• night auditors
• reservations agents
• entrepreneurs
• consultants

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

The Digital Cinema area of emphasis gives you real world, hands-on experience that will allow you to not only learn about filmmaking but also become a filmmaker and creative entrepreneur.

Hands-on, industry-relevant skills:-
DMIT - Digital Cinema courses prepare you for the creative, technical and business aspects of the rapidly growing digital cinema industry while also introducing you to industry organizations and professionals that can assist you in launching your career.

Our in-depth and industry-directed courses will help you identify original stories and teach you how to plan, script, budget, film and edit these stories to deliver finished narrative fiction and non-fiction productions. Through all four levels, you will be mentored by award-winning industry professionals.

For aspiring producers, content creators and technical craftspeople, the Digital Cinema area of emphasis is highly focused on the business side of digital screen production. You will have the opportunity to develop your own transmedia production while developing a business plan that includes financing, casting and all five phases of production.

The Nanosystems Engineering Technology program is the only program of its kind in Canada. In it, you will be exposed to face-to-face, hands-on learning in our labs including in our specialized cleanroom facility.

In the program, you will learn about the fabrication and evaluation of micro- and nanomaterials and devices commonly used in a wide range of industries, such as health care, smart devices, and energy production and storage. You’ll learn how to operate systems and equipment used by nanotech researchers and manufacturing companies, such as the scanning electron microscope (SEM), which is used to obtain images of objects at the nanometre scale.

If you are seeking a multidisciplinary career in science and technology, this program will appeal to you. Nanosystems offers a growing number of high-tech and non-traditional career paths that will constantly challenge you with new and complex problems to solve.

You want to learn the skills and knowledge of conventional machining operations to utilize drill presses, lathes, milling machines and various grinding machines, including using Computer Numerical Control (CNC) programming, set up and operation. You will also receive introductory CAD/CAM training, as well as inspection and quality control training.
Successful completion of this 1-year certificate can allow you to challenge the first year apprenticeship exam for the Machinist program.

What You Will Learn
Hands-on, industry-relevant training

• Graduates of the Computer Numerical Control (CNC) Machinist certificate are responsible for manufacturing components for the oil and gas, mining, forestry, construction and transportation industries. A CNC machinist will demonstrate trade specific skills in programming, setup and operation of computer controlled tools. Graduates will also perform competently when working with manual machine tools.
• Machinists are able to work efficiently on their own and/or in team environments where problem-solving skills, critical thinking skills and current knowledge of technological trends and quality practices are essential to daily work. A graduate with a CNC Machinist certificate may be given the opportunity to apprentice in the machinist trade. This program has both fall and winter intakes.

Is this program for you?
To be successful as a machinist, you must have:

• Good hand-working skills
• Good problem-solving capabilities
• Mechanical inclination
• An ability to work well with others
• Competence in math
• Mature attitudes towards learning and work
• During the first semester of the CNC Machinist certificate, you will receive training on manual machines such as engine lathes, milling machines, drill presses and grinders.
• In the second semester, you will receive training on the operation, set up and programming of CNC (computer numerical control) turning and milling centres.
• The final component is an 8-week  work placement, which gives you an opportunity to apply your skills and knowledge in an industrial setting by working in a machine shop.

Careers that leave a lasting impact
Have a passion for building? Civil Engineering Technology is a 2-year diploma program or 2-and-a-half year co-op diploma program through which you’ll learn how to design and manage construction, infrastructure and research projects.

Our curriculum has been developed with industry input to ensure we cover all of the theoretical and practical elements that are essential within the broad field of civil engineering. With the help of hands-on learning and supportive, experienced instruction, you’ll apply computer-aided design & drafting (CADD) systems to civil engineering problems in the areas of:

• Structural design
• Urban services design
• Highway design
• Pavement design
• Geotechnical design
• Project management
• Applied research

Do you have an eye for design?
The Engineering Design Technology program will provide you with both a theoretical and practical education that will serve as the foundation for a career as an engineering designer.

This program could be a great fit for you if you:

• Demonstrate a high attention to detail
• Have good math and physics skills
• Enjoy working with computers
• Enjoy working in an office environment

Engineering Design Technology presents a broad spectrum of engineering content, primarily focused on the fundamental principles of engineering design and computer applications common to a variety of engineering disciplines.

Architectural technologists assist in translating design concepts into graphic images, and then converting those images into technical drawings and specifications that result in creation of the built environment. Students in the Architectural Technology program learn freehand sketching techniques, but the program's main emphasis is on manual and computer-aided drawing skills.

What You Will Learn
Hands-on, industry-relevant skills

Throughout the program, you will study theoretical concepts and learn how to:

• Create and coordinate a full set of working drawings to industry standards
• Participate in all aspects of the design process, including the presentation of design solutions
• Research and apply various codes, standards and systems used in design and construction
• Visualize and communicate design in both 2 and 3 dimensions
• Use current architectural tools and software common
• Contribute individually and as part of a team in a professional architectural environment

Architectural technologists must possess superior presentation and communication skills in order to present drawings and plans to clients, workers and management teams. Throughout the program, you will develop your word processing, visual presentation and business communication skills.

Do you want to create change within your organization? Have you dreamt of becoming your own boss?

The Business Administration – Entrepreneurship and Innovation diploma program fosters an entrepreneurial mindset and will help you develop the knowledge and skills you need to become an innovator. 

Our courses have been designed to help you pursue a career path that is right for you. You will be equipped for your chosen venture, whether a for-profit business, social enterprise, or as an entrepreneur within an innovative organization.

Environmental Monitoring & Assessment students investigate the impact of human activities on air, water, soil and vegetation, and gain a solid foundation in environmental sampling, assessment and laboratory skills. Students learn how to monitor and assess environmental quality, apply principles of quality assurance/quality control, manage waste, and reclaim and remediate land. Graduates may conduct environmental site assessments, collect samples from surface and ground water, air, soil and waste, or analyze samples for pollutants in an environmental lab. They work with industry, consultants or government on land and water remediation and reclamation, and investigate environmental issues for various research groups.

Hands-on, industry-relevant skills
During the first semester, you'll acquire skills and knowledge in the general sciences of biology and chemistry, communications, ethics, botany, zoology, genetics, and lab techniques and calculations.

You'll then be trained in the following areas
Field Skills:

• Perform field analysis of soil, vegetation and water quality
• Monitor air pollutants
• Collect environmental samples from air, water, soil, plants and waste for further lab analysis
• Conduct environmental site assessments – ESA (Phase I - III)
• Maintain and calibrate field equipment for environmental sampling

Additional Skills:

• Design and manage group-based projects
• Measure effects of pollutants on the environment by studying toxicology
• Use current solid and hazardous waste treatment technologies and monitoring systems
• Use legislation and standards related to environmental issues
• Employ pollution prevention and pollution control technologies
• Use quality assurance and quality control (QA/QC) principles to obtain accurate data
• Generate and keep detailed log books
• Compile and manage data using MS Office
• Write reports, perform literature reviews, and prepare and give presentations

Over 10,000 employees are injured at work in Alberta every year. Some are seriously injured, even killed.

As a result, organizations across the province continue to invest more time and resources to better train and equip their personnel, identify potential dangers and develop strategies and policies that keep employees safe.

The NAIT Occupational Health & Safety (OHSD) diploma program will prepare you to fill essential health and safety roles in industry to meet the growing demands of government regulations.

Our 2-year program focuses on real-world issues and practical skills and is the only program in the province that offers full-time OHS training. We are recognized by the Board of Canadian Registered Safety Professionals, and our graduates meet the educational requirements for Canadian Registered Safety Professional (CRSP) certification, the most recognizable designation for safety professionals in Canada.

Over 5 terms, you’ll be provided with classroom and lab instruction, as well as applied learning opportunities in a variety of workplace settings.

Co-Op Work Term
Your co-op work term will give you the opportunity to apply your professional skills and theoretical understanding in a workplace setting. You’ll be given various occupational health and safety responsibilities and projects in a business, industry, government, education or non-profit organization. 

In addition to providing new learning experiences, the work term will give you valuable on-the-job skills and industry contacts that will set you up for success after graduation.