Certificate in Millwork and Carpentry

at Northern Alberta Institute of Technology (NAIT) Canada

Medical Radiologic Technology is the art and science of correctly positioning the patient and X-ray equipment to produce and record images for the purpose of visualizing the extent of disease or injury to a patient. The majority of X-ray examinations are performed in the Diagnostic Imaging Department; however, they are also carried out in the operating room, in the emergency department, on wards and in specialized intensive care units.

The Medical Radiologic Technology program teaches students how to perform X-rays, including evaluating the diagnostic quality of images, patient care and quality control. Students also gain expert knowledge in radiation safety and protection practices. Many of the radiographic examinations and procedures involve working alongside physicians, other technologists, nurses and non-medical personnel.
 

NAIT’s 1-year Dental Assisting certificate program will give you the knowledge and skills necessary for direct entry to dental practice. From infection prevention and control to all chairside restorative and specialty procedures, as well as direct patient care and dental practice administration, our program will prepare you to be an integral member of the dental health care team.

Hands-on, industry-relevant training
Our training approach emphasizes practical experience backed by strong theoretical knowledge in the skills and technology necessary to be a successful Dental Assistant. Our program features the following:

•  38-week full-time program: two 15-week semesters and an 8-week intersession.
•  Small group learning, which allows for the optimum student-to-instructor ratio
•  Practical, hands-on approach to learning in labs, as well as through clinical placements within the dental community
•  Providing treatment to both peers and the general public in our fully equipped onsite dental clinic

You are curious about technology and its endless possibilities. You like to challenge yourself to find a solution to a problem. You want to be the go-to desktop or server support guru for technical advice. You are fascinated by cloud computing and how it works. This is a great way to jump into the field of technology because you’ll learn how to support secure servers and network infrastructures using on premise and cloud technologies. Come and join the dynamic and exciting field of technology! CNA – Supporting IT!

Hands-on, industry-relevant skills:

The Computer Network Administrator (CNA) program provides students with the fundamental knowledge and hands-on technical skills required to be successful in today’s information technology world. The CNA program teaches students foundational technology skills, core knowledge areas, and strategies for being successful. Students get specialized training with up-to-date applied technology.  

Through the course of the program, you can expect to learn:

• PC fundamentals
• Microsoft Windows server and client operations
• Linux server and client operations
• Virtualization
• Cloud computing
• Scripting and automation
• Network infrastructure
• Troubleshooting
• Assessing and supporting end user needs
• Supporting basic security policies and practices
• Working effectively and ethically as an individual or member of a team

NAIT's Construction Engineering Technology program will provide you with a broad knowledge of the management, estimating and technical aspects of construction, with a primary focus on commercial and residential buildings and related support industries.

You'll develop your drawing interpretation, detail sketching and site surveying skills. You'll also be shown the ins and outs of project planning, contract administration and sub-trade coordination so you can advance your career into site leadership and project management.

The Construction Engineering Technology program works with a program advisory committee made up of industry experts who ensure the program provides students with the knowledge and skills currently required by employers. The program is also accredited by the Canadian Construction Association Gold Seal Certification program and by the Association of Science and Engineering Technology Professionals of Alberta (ASET).

The Electrical Installations Technology diploma is your pathway to apprenticeship, and a unique opportunity to get the technical and career essential skills you need to succeed in the electrical industry.

The program focuses on theory and hands-on training required for the installation, repair and maintenance of electrical systems in residential, commercial and industrial environments. This program also teaches career essential skills such as communication, professionalism and collaboration, which will help you pursue a career in the Electrical Installations Technology field.

The Electrical Installations Technology diploma offers a direct pathway into trades training at NAIT without having to first be a registered apprentice.

Industry-approved training
A career in the electrical industry calls for an understanding of both technical knowledge and career essential skills. Learning outcomes for this program include:

• Understanding of industry standards, legislation, policies and practices
• Ability to:
  • Identify safety hazards
  • Explain, discuss and apply electrical theory and mathematics
  • Install, analyze and maintain rotating, static and solid-state electrical equipment and controls
  • Design, interpret and convert drawings and schematic diagrams for electrical installations
  • Communicate effectively using written, verbal and graphical means
  • Navigate, interpret and apply applicable sections of the Canadian Electrical Code Part 1 for electrical installations

The program content and structure aligns with Alberta Credential Framework expectations. This 2-year diploma program provides you with immediate opportunities for employment in the field of electrical installation. After completing the program, you will be eligible to enter into an apprenticeship and complete apprenticeship hours to receive a journeyperson’s certificate.

This program offers a rewarding and challenging career for those individuals interested in providing emergency medical services to the sick and injured in a prehospital care environment. Primary Care Paramedic (formerly known as Emergency Medical Technician-Ambulance) training utilizes the facilities at NAIT, active treatment hospitals, basic and advanced life support ambulance services and other allied emergency services.

In addition to the program being offered twice a year at its main campus, NAIT also offers the program twice per year in partnership with Lethbridge College and once per year in partnership with Lakeland College as part of its Emergency Services Technology Diploma Program.

What You Will Learn
Hands-on, industry-relevant training
In this certificate program, you will learn about providing basic emergency care, including assessment and treatment of patients with a variety of medical disorders and injuries.  Your learning environment will consist of lectures, labs, clinical simulations and practicum.  Areas of learning will be focused on but are not excluded to:

• Introduction to emergency medical services and pre-hospital care
• Human anatomy, physiology, and pathophysiology
• Basic life support skills including medical and trauma management
• Pharmacology
• Diverse patient populations including management of some pediatric disorders and assisting with childbirth

You will also be trained in physical and mental health self-care, to ensure you are prepared for a demanding patient care environment.

Practicum will consist of placement with an ambulance service and one week in an acute care hospital emergency department. You will be expected to work shifts including evenings, nights and weekends, and you may be required to travel outside of Edmonton for your practicum placement.

The first 6 courses in the program consist of a mixture of lectures and labs of approximately 400 hours, and the last course will consist of practicum placement of approximately 240 hours.

You can expect to spend, on average:

• 28 hours per week attending classes over the course of a semester
• 15 to 20 hours per week studying and completing class assignments
• 40 hours per week on practicum

In the Millwork and Carpentry program, you will gain hands-on skills in the design and construction of wood structures, cabinets, shelving units and furniture. This certificate program will explore the two traditional woodworking trades of Cabinetmaker and Carpenter, with an emphasis on tools and safety.

Students specialize in either the cabinetmaking or carpentry stream. Each stream emphasizes materials and techniques relevant to that trade specialization.

The Cabinetmaking stream (Millwork), introduces students to construction of both upper and lower casework, complete with doors, drawer, mouldings, hardware and exposure to a variety of different materials used in the trade.

The Carpentry stream provides an introduction to residential home construction in foundations, framing and finishing carpentry.experience related to their stream.

What You Will Learn
Hands-on, industry-relevant training
Successful Millwork and Carpentry certificate graduates display the following attributes.

• Safety conscious
• Work well with tools
• Work well within a team environment
• The ability to stand, crouch and kneel for long periods of time
• Manual dexterity
• The ability to lift heavy loads
• The ability to solve arithmetic problems accurately
• A positive and professional learning attitude, with an interest in woodworking

NAIT's Heating Ventilation Air Conditioning Refrigeration (HVACR) Technician certificate offers training for the heating, ventilation, air conditioning and refrigeration industries. Students will learn how to commission, design, install, maintain, service and trouble shoot HVACR systems.

The goals of the certificate are to provide familiarity with the heating, ventilation, air conditioning and refrigeration industry and understanding of the operating principles of industry-specific equipment, systems and procedures. Students will work with hand tools and power tools, as well as computer programs and computer simulators. Instructional class time consists of 50% theory classes and 50% practical classes (computer lab/shop).

Graduates with this certificate will receive recognition for periods 1 and 2 of technical training towards the Refrigeration and Air Conditioning Mechanic (RACM) apprenticeship program. Graduates will receive full credit towards the 1st and 2nd periods of RACM once they successfully challenge 1st and 2nd period technical exams and obtain their on the job training hours.

What You Will Learn
Hands-on, industry-relevant training
The Heating Ventilation Air Conditioning Refrigeration Technician certificate provides an intensive technical introduction to the applied sector of the heating, ventilation, air conditioning and refrigeration industries. The concentrated one-year training package prepares students for entry-level employment in this very diverse job market.

Classroom & Study Hours
Students can expect to spend, on average

• 33 hours per week attending classes over the course of a semester
• 15 to 30 hours per week studying and completing class assignments

Is This Program For You?
This program will appeal to those with a general mechanical background looking for focused, job-ready training, or to individuals with a related trades certification, such as sheet metal, electrical, plumbing or instrumentation, who desire fast re-training

Bachelor of Business Administration (BBA) Human Resource Management students learn how to attract, retain and develop people within an organization. Human Resource (HR) Management is a strategic part of any organization. Finding the right people at the right time can lead to a successful and profitable organization. Building on best practice and technical workplace skills, you'll be taught situational case studies in change management and leadership. A focus on critical thinking and analysis will help prepare you for key decision-making roles. All human resources-related courses have prerequisites, so it is important to carefully plan the order your studies.

Respiratory Therapists are dedicated to the diagnosis, treatment, rehabilitation and education of patients with heart and lung disorders. As a Respiratory Therapist, you’ll work with patients of all ages, from infants and children to adults and geriatrics. The Respiratory Therapist is a crucial life-saving and life-supporting professional, and as a NAIT graduate you’ll be well equipped to work in a wide variety of hospital and health care settings.

What You Will Learn
Hands-on, industry-relevant training
Learn to plan and implement diagnostic procedures for patients suffering from a wide range of heart and lung disorders. This 3-year diploma program will feature simulation experience, with classroom and lab instruction, combined with clinical rotations in various hospital settings. The program features hands-on training in areas such as:

• Human anatomy, physiology, pharmacology and pathophysiology
• Airway management and cardiopulmonary testing, monitoring and resuscitation
• Assessment of cardio-respiratory patient status; ventilator support; testing and evaluation of respiratory equipment

You can expect to spend, on average:

• 27 hours per week attending classes over the course of a semester.
• 10 to 15 hours per week studying and completing class assignments.
• Upon successful completion of the RET program the graduate is eligible to challenge the Canadian Board for Respiratory Care (CBRC) entry-to-practice certification examination to become a registered respiratory therapist.
• In order to practice as a Respiratory Therapist in the province of Alberta, technologists are required to be registered with the College and Association of Respiratory Therapists of Alberta to obtain a license to practice.