Certificate in Engineering Transfer

at Camosun College - Interurban Campus Canada

Camosun’s Engineering Bridge programs are for technology diploma grads who want to continue with third-year studies at UVic or UBC to finish an engineering degree. This is your next step to becoming a Professional Engineer.

The Mining Engineering Bridge program is offered by Camosun with the full support and cooperation of the University of British Columbia Vancouver (UBC V). Gain access to the third year of the Bachelor of Applied Science at UBC V with your Mining Engineering Technology diploma. You'll study advanced topics that aren't typically found in technology programs.

Mining engineering is concerned with the optimal exploitation of mineral resources while minimizing environmental impact. The discipline requires a broad knowledge of engineering and scientific subjects. The Bridge to UBC study option is offered from September through April. You'll start your third year of the Bachelor of Applied Science degree program at UBC Vancouver in September.

Once accepted into UBC you can participate in the Co-operative Education option. If you decide to participate in Co-op, some work terms from your technology diploma may be transferable between institutions. There is an optional internship work term available in the Bridge that is transferable.

Note: To be eligible to participate in a Co-op or Internship term, you need to successfully complete all first-term courses with a minimum GPA of 3.0, be fully enrolled in the academic term immediately preceding the work term with a minimum of nine (9) credits, and complete the workshop series CDEV WPS prior to your first work term. You must also receive approval from the Applied Learning, Co-operative Education and Career Services department.

Advance your skills in the global tourism and hospitality industries
You'll gain relevant applied practical skills in hotel operations, restaurant management, and integrated event management as well as a solid grounding in practical business skills. Core themes of the credential include: sustainability, service management, entrepreneurship and cross cultural diversity including an Indigenous world-view, this will allow you to better examine both tourism and hospitality through a global lens.

What You'll Learn
As a post-degree diploma student, you will receive targeted training across a range of skill areas that will set you up for success in the hospitality and tourism sectors.

Work Experience
You will gain practical skills and experience by combining your hospitality and tourism studies with a four month work experience placement. This will allow for the practical application of program concepts while gaining valuable industry-specific work experience.

The Engineering Graphics Technician (EGT) program is ideal for those with an interest in engineering/architectural visualization, an aptitude for computer aided design, or have a foreign credential in engineering /architecture and are looking to enter the Canadian job market.

The eight-month long Engineering Graphics Technician program includes a special emphasis in 2D and 3D computer-aided design (CAD) and drafting. You’ll start with two terms on campus (14 weeks and 7 weeks), followed by a final, two-month internship work placement.

Technical expertise, analytical precision, and exceptional service
Certified Medical Laboratory Assistants are front-line healthcare workers responsible for collecting human blood, body fluids, and physiologic data used by physicians to diagnose medical conditions. As part of the Interdisciplinary Healthcare Team, Certified Medical Laboratory Assistants are valued for their careful attention to detail and compassionate treatment of patients and clients.

Work in health care
The full-time Certified Medical Laboratory Assistant Program is a comprehensive one-year, entry-level certificate in pre-analytic laboratory sciences. This program prepares graduates for their role as integral members of the healthcare team by providing a broad foundation in laboratory science theory integrated with authentic simulation environments and workplace clinical practicums. Students learn to incorporate exemplary patient and client-centric behaviours while mastering the techniques of blood collection (phlebotomy), analytical sample collection, and sample preparation. Students learn to collect and process data required for diagnostic investigations.

What to expect

• The full-time Certified Medical Laboratory Assistant Program is a comprehensive one-year (ten months), entry-level certificate in pre-analytic laboratory sciences.
• Flexible pathways for progression and a variety of approaches to educational delivery prepare you for clinical practicum opportunities in both hospital and community based laboratories throughout Vancouver Island. Course delivery includes traditional face-to-face and blended classroom instruction, practical simulation labs, teaching clinic integrations, technology-enhanced applied learning, and on-line courses.
• You can expect to spend about one to three hours per day on homework, including weekends. Practicum placement locations are available throughout Vancouver Island. During your placement, you work four, 7-hour days, for up to seven weeks. You might be scheduled for days, evenings, or weekend shifts.

Work Experience :  7-week clinical practicum

Practical Nurses care for clients at all life stages across the continuum of care. Prepare yourself for a career that provides safe, knowledgeable & professional nursing care within a variety of health care settings.

What you'll learn
This full time diploma program provide will provide you with the knowledge, skills, judgements and attitudes required to practice as a practical nurse within a variety of health care settings. The program will prepare you to care for individuals and families at multiple life stages in acute, complex, and community care settings. Graduates of the program are eligible to write the Canadian Practical Nurse Registration Examination (CPNRE) to apply for licensure to become a Licensed Practical Nurse in British Columbia.

Knowledgeable
In the Practical Nursing Program you will study from the same body of nursing knowledge as registered nurses (RNs) and registered psychiatric nurses (RPNs) with a more focused approach in foundational knowledge, critical thinking, and clinical judgment appropriate to the role of a practical nurse. This program will provide you with the knowledge, skills, judgment, and abilities to contribute in all phases of care from prevention to acute treatment and management, to long term and palliative care.

Competent
Practical nurses integrate knowledge, skills, behaviours, attitudes, critical thinking and clinical judgment expected of an entry-level practical nurse to provide safe, competent, and ethical care. Working in collaboration with other health care team members, you will provide direct nursing care and in acute care hospitals as well as complex care and community care settings.

Professional
Practical nurses are health care professionals who care for a wide range of clients at all stages of life. As a professional nurse, you will work within your own scope of practice, standards of practice and code of ethics.  Practical nurses are frontline nurses involved in the assessment, planning implementation and evaluation of nursing care and are a valuable member of the health care team

Choose from transfer courses in more than 30 different subject areas. These courses will transfer to at least one BC post-secondary institution.

Whether you want to take one or two courses at a time, or register for full-time studies with four or five courses each semester, the University Transfer program gives you the freedom to design your own timetable. Generally speaking, you'll probably start by taking 100-level courses (first-year) and follow up with corresponding 200-level (second-year) courses.

To find where a course transfers, look for the BC Transfer Guide link that's included in each course description.

If you plan to continue your studies at an an out-of-province university you'll need to get your transcript assessed by that institution. Make sure you consult with the university regarding their admission criteria, GPA requirements and application process to help you plan your transfer program at Camosun.

University Transfer Subjects

• Accounting
• Anthropology
• Art & Art History
• Archaeology
• Asia-Pacific Studies
• Astronomy
• Biology
• Business
• Chemistry
• Communication Studies
• Computer Science
• Creative Writing
• Criminal Justice
• Digital Media
• Economics
• English
• Environmental Technology
• Finance
• Gender, Sexuality & Women's Studies
• Geography
• Geoscience
• Global Studies
• History
• Health
• Indigenous Studies
• Interdisciplinary
• Japanese
• Korean
• Marketing
• Mathematics
• Music
• Philosophy
• Physics
• Political Science
• Psychology
• Religion
• Social Sciences
• Social Work
• Sociology
• Spanish

The Bachelor of Sport Management is a dynamic applied degree program that prepares graduates to work in the sport management industry. Graduates of this leading-edge program are analytical and strategic thinkers who have the requisite skills and knowledge to lead and manage in a variety of sport industry contexts. Graduates are prepared to practice professionally, responsibly and ethically in the sport management industry and integrate management, business, sport science, and socio-cultural knowledge into the role of the sport manager. Applied strategic and organizational planning skills, along with the ability to develop professional relationships within the sport and business community, enable graduates to lead and manage in sport environments, provincially, nationally and globally. Applied learning opportunities including internship, and capstone learning experiences are offered throughout this program.

Learning Outcomes
At the completion of the program students will be able to:

• Apply and synthesize knowledge of sport theory, concepts and principles in a range of sport management contexts.
• Incorporate management and business concepts and principles into sport industry/field practices.
• Demonstrate and model social responsibility and cultural awareness including Indigenous awareness as a sport management professional.
• Plan, design, implement, and assess programs and events that support organizational goals.
• Apply and integrate business, management and sport knowledge to effectively manage resources and facilities
• Use strategic and critical analyses to make informed decisions, respond to change, and problem solve.
• Lead and positively influence individuals, teams, groups and organizations in the accomplishment of goals.
• Demonstrate ethical, responsible and accountable behaviour as a sport management professional.

Invent and improve
Learn relevant, up-to-date skills in the design, development, manufacture and maintenance of mechanical devices.

WHAT YOU’LL LEARN
Industry standards developed in the classroom
You’ll gain practical hands-on experience in Camosun's laboratories and CNC-equipped machine shop balanced with a solid grounding in English, math, physics and engineering concepts.

What to expect
The program is delivered over five semesters, starting in September and running through to the end of August in the second year. Later in the first year you will choose if you want to go straight through or participate in paid Co-op or Internship work terms.
The program is rigorous, requiring you to do work outside of the classroom. In addition to up to 30 hours per week of class time, you should expect to spend between 15-20 hours outside of the classroom per week.
Year 1:- In your first year, in addition to a foundation in engineering math, you’ll take courses in manufacturing processes, fluid power, mechanical control programming, engineering graphics, engineering materials, electricity and machines, building systems, and statics & dynamics.
A workplace education planning course prepares you to participate in optional internship or co-operative education study options. You can start your first four month work term at the end of year one.
Year 2:- In your second year you’ll have the option of completing the program or extending it by participating in co-operative education work terms. This work experience will extend your length of study into a third year, giving you four to twelve months of paid industry experience.
Your second and final year will give you the skills you need to be work-ready for an industry that is vibrant and in-demand. You’ll study mechanics and vibrations of machines, strength of materials, fluids and heat transfer, control systems, machine design, thermodynamics, robotics and automation, electronics, and, energy and sustainability.
A comprehensive hands-on project planning and design course is an integral part of second year, and culminates in a public showcase.

Camosun’s Engineering Bridge programs are for technology diploma grads who want to continue with third year studies at UVic or UBC to finish an engineering degree. This is your next step to becoming a Professional Engineer.

Mechanical Engineers design and build machines and other products, such as robots, spacecraft, automobiles, artificial limbs, amusement park rides, elevators, and manufacturing equipment. If something moves or uses energy, mechanical engineering was probably involved in its design or production.

The Bridge to UVic study option is offered January through December. You'll start your third year of the Bachelor of Engineering degree program at UVic in January the following year.

Once accepted into UVic you will be required to participate in a mandatory Co-op, however, some work terms from your technology diploma may be transferable between institutions.

You'll gain a solid foundation in business management with the broad range of business courses and opportunities to develop competencies and practical management skills for today’s business environment.