Bachelor of Applied Technology (Honours) - Architecture - Project and Facility Management

at Conestoga College - Cambridge Campus Canada

Embedded Systems Development (ESD) is a four-semester graduate certificate program including a one-semester exploration of career management or an optional co-op in the embedded systems industry. The program is aimed at providing the student with a solid understanding of the embedded systems industry, gaining hands-on skills in the development (design and implementation) of both hardware and software for embedded systems.The program integrates a hands-on, practical approach to augment theoretical knowledge a student may already have coming into the program. Applied projects and lab work help prepare graduates for a career in embedded systems development. The optional co-op stream includes one co-op work term instead of the Guided Career Management course. 

Students of the Electrical Engineering Technician program learn a full range of electrical skills enabling them to work in a wide variety of electrical engineering areas including power systems and automation control systems. As well as acquiring a solid foundation of knowledge, students gain maximum career flexibility and the opportunity to explore several avenues in the electrical field. Students gain experience with electric motors, controls, PLCs, transformers and their industrial applications. Knowledge of electrical theory is supplemented by practical applications in power systems, industrial solid state controls, instrumentation, programmable logic controllers and motor control systems. Students work with heavy electrical motors, generators and transformers, learning a variety of industrial applications.Special emphasis is placed on writing, implementing and troubleshooting PLC programs, and communicating technical information effectively.Graduating students perform technological functions in various aspects of the energy field, primarily in support of research, development and design at a recognized technologist level.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category. 

The Bachelor of Engineering - Mechanical Systems Engineering (MSE) program, delivered at the honours level, is accredited by the Canadian Engineering Accreditation Board (CEAB) allowing graduates to become professional engineers after completing their mandatory work experience and writing a professional practice exam.The program integrates a rich blend of interdisciplinary topics covering mechanical, industrial and control engineering to enable graduates to design complex computer-controlled mechanical systems. Automated manufacturing systems, comprised of mechanical components, conveyors, electrical and pneumatic actuators, sensors and robots are examples of such mechanical systems.The MSE program is delivered in a unique project-based curriculum model allowing students to learn by doing while developing strong skills in business methodologies, project management, environmental protection and interpersonal and team dynamics. As they work on increasingly complex projects, students progress from the technical fundamentals to advanced leading technologies in design, manufacturing and automation. This project work, combined with twelve months of paid co-op opportunities, thoroughly prepares MSE graduates for a successful career in a variety of engineering fields.

Civil engineering involves all aspects of designing, constructing, and maintaining our cities to serve the needs of growing communities. As a technologist in this field, you will aid in the design and construction of subdivisions, highways, stormwater management, drinking water systems, waste-water systems, landfills, and structures. The Civil Engineering Technology program at Conestoga College is a three-year advanced diploma program (with optional co-op) where students gain a balanced education in civil engineering, combined with hands-on skills in labs and in the field. Students will:design clean water distribution, waste-water purification, and stormwater management systems;conduct designs of wood, steel, masonry, and concrete structures;test soils, road, and construction materials in the lab and in the field;learn how to use modern survey technology (including GPS) and apply these techniques to land development projects;create engineering drawings using AutoCAD and Civil 3D for civil projects;study the design of roads, highways, and transportation construction management; anddemonstrate their knowledge of civil engineering through a final capstone project working directly with industry experts. In this program, you will be under the guidance of faculty who are passionate about their field, have strong ties to industry, and are vested in helping you to achieve your career goals. Graduates can become Certified Engineering Technologists (CET) through the Ontario Association of Certified Engineering Technicians and Technologists (OACETT).

The three-year Electrical Engineering Technology program has been designed to provide students with both theoretical and practical experience, enabling them to work in a wide variety of electrical engineering areas including power systems and process control. In the first two years, students gain experience with electric motors, controls, PLCs, generators, transformers and their industrial applications. In the third year, students continue with advanced PLC applications as applied to a variety of industrial processes including machine controls, PID controls, batching operations, remote monitoring and servo systems.The Electrical Engineering Technology program prepares students to work with power generation, automation systems, instrumentation and various other control systems. Throughout the program, students will also gain experience in safety practices, safety standards and equipment, technical writing and CAD. The optional co-op stream includes four consecutive four-month work terms.Graduating students perform technological functions in various aspects of the energy field, primarily in support of research, development and design at a recognized technologist level.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.

In the Welding and Fabrication Technician diploma program, students will develop the broad base of knowledge and skills required for the layout, preparation, forming, fitting, joining, and inspection of welded fabrications.
Students will have the opportunity to study in the outstanding modern facilities at the Cambridge campus, where they will spend much of their time developing and applying their skills in a well-equipped, full-sized welding and fabrication shop. Students learn to follow metal fabrication projects from the computer-aided engineering drawing (CAD) stage, through the cutting and forming processes of piece parts, to the fitting, welding and inspection of fabrications. Students also have the opportunity to use conventional and computer numerical controlled (CNC) fabrication equipment programmed through the use of computer-aided manufacturing (CAM) software.

Students will also have the opportunity to develop welding skills with the common arc welding processes such as Shielded Metal Arc Welding (SMAW or stick), Gas Metal Arc Welding (GMAW or MIG), Flux Cored Arc Welding (FCAW), and Gas Tungsten Arc Welding (GTAW or TIG). Opportunities to challenge welding skills qualification tests as required by the Canadian Welding Bureau (CWB) and or the Technical Standards and Safety Authority (TSSA) will be provided. (Extra fees payable to these external weld testing authorities will apply; these tests are optional.)

Graduates from Electronics/Computer/Telecommunications Engineering Technician/Technology programs work with electronic, computer and communications equipment and systems. They are technical experts and problem solvers. Many of our graduates report that they enjoy the creative aspects of the job and seeing projects come to life. The three programs have the same first year. At the end of first year, students may switch programs if they desire. Graduates of the Computer Engineering Technology program are able to design, build, test and repair a computer-based system or any part of one. Their very strong electronics knowledge and skills enable them to take on many roles in industry. Their strength in hardware, mathematics and theory equips them to interface with the physical world. Because of the power of embedded processor chips, they are used to simplify (and make less expensive) most non-trivial equipment and systems. (Fuel injection and pollution control for automobiles is a classic example). Our graduates design, build and test the computer part of such systems. Their strong mathematical background and interpersonal skills equip them to work as part of an engineering team. Since the program is approximately half lab work and half theory, graduates have a particular advantage in the practical implementation of systems, software and circuits. The optional co-op stream includes four consecutive four-month work terms.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.The Computer Engineering Technology program has been recognized by the Royal Canadian Navy and now qualifies for Canadian Armed Forces skill recognition. Students who graduate from this program will receive advanced standing as a Weapons Engineering Technician in the Royal Canadian Navy (subject to successful enrolment in the Canadian Armed Forces).

Wireless Network Infrastructure

This program prepares graduates with degrees or diplomas in telecommunications, electronics, or computer engineering/technology for work in emerging fields in the wireless telecommunications industry. Students will enhance their undergraduate knowledge with practical skills that include the use of industry standard tools (drivetest tools, propagation tools, spectrum analyzers, network analyzers, etc.), and the techniques required for success in the wireless industry. Students will broaden their familiarity with troubleshooting and the configuration of local area and wide area networks (LANs and WANs) and networking topics relevant to telecom carriers including virtual private networks, quality of service, and others. Cutting-edge topics which include long term evolution (LTE) and 5th generation wireless networks, high bandwidth wireless (WiGig+) and concurrent MIMO systems, will ensure that graduates will be in high demand. 

Information Technology Infrastructure

Information technology workers need a broad range of practical skills to enhance concepts and principles that are often the focus of post-secondary study. This two-semester Ontario College Graduate Certificate program concentrates on hands-on application of network and systems administration practices and techniques commonly employed in modern IT enterprise infrastructure management.Students will gain valuable skills and knowledge in the deployment and configuration of network operating systems (desktop and server), infrastructure services and network technologies. Students will also acquire foundational knowledge to work towards challenging professional certification exams from various organizations. Graduates of this program will have the skills required to move into IT administration positions or transition into more advanced graduate studies in areas such as security, networking and operations.

In this diploma program, students gain skills for a career in today's automated manufacturing setting. In addition to developing a thorough knowledge of numerically controlled manufacturing systems, students will acquire a comprehensive background in general manufacturing and design fundamentals. This broad?based curriculum includes: learning and applying numerical control (NC) programming concepts; utilizing CAD/CAM techniques to integrate design and manufacturing; an introduction to the world of robotics; an introduction to designing power-transmitting devices and developing and applying quality assurance process planning and production control techniques to the solution of practical manufacturing problems. Today's effective technician is also a skilled communicator, and students will learn to communicate technical information at all levels through the use of linguistic, graphic and computerized methods. There is a common first two years with the Mechanical Engineering Technology (Automated Manufacturing) program. The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category.The optional co-op stream includes two co-op work terms.

This full-time graduate certificate program will help prepare graduates with a previous technical degree or diploma for engineering work in the industrial automation sector. The program offers key practical courses similar to those found in our highly successful Robotics and Automation Technology program. The optional co-op stream includes one co-op work term instead of the Guided Career Management course.

Program Outcomes

• Control automated manufacturing components and systems though the influence of configuration, programming selection, and connectivity.
• Create new, and interpret existing two and three dimensional CAD models of parts and assemblies for automated manufacturing systems
• Produce three dimensional CAD animations to simulate machine motion and operations
• Determine safety requirements of robotics and automated systems and apply them to the design of components and systems
• Work with appropriate measuring devices, and data acquisition systems to record information and measurement for analysis and interpretation.
• Analyze and communicate technical information effectively to a variety of audiences using various media and methods.
• Apply professional conduct while engaged in academic and practical activity in the classroom and during the co-op work term.

Applying to the Co-op Stream

• All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
• To be considered for admission to the co-op stream, students are required to achieve a minimum 80% session weighted average with no dropped or failed courses.

Co-op Information

• Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages
• The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
• Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.
• Students who are not eligible for co-op or do not secure a co-op work term by the start of the work term semester will be offered the option to enrol in the 15 credit Career Management in Canada GCM8000 co-op alternative. This co-op alternative involves one 3 hour on campus session per week and 12 hours per week of online and out-of-class activity.
• If GCM8000 is selected, the student must attend sessions from the first session of the term and cannot transfer back into the co-op stream.
• GCM8000 may be delivered at the Doon, Waterloo, or Cambridge campus.