Bachelor of Engineering in Electronic Systems Engineering

at Conestoga College - Cambridge Campus Canada

Embedded Systems Development (ESD) is a four-semester graduate certificate program including a one-semester exploration of career management or an optional co-op in the embedded systems industry. The program is aimed at providing the student with a solid understanding of the embedded systems industry, gaining hands-on skills in the development (design and implementation) of both hardware and software for embedded systems.The program integrates a hands-on, practical approach to augment theoretical knowledge a student may already have coming into the program. Applied projects and lab work help prepare graduates for a career in embedded systems development. The optional co-op stream includes one co-op work term instead of the Guided Career Management course. 

Graduates from the Electronics/Computer/Telecommunications Engineering Technician/Technology programs work with electronic, computer and communications equipment and systems. They are technical experts and problem solvers. Many of our graduates report that they enjoy the creative aspects of the job and seeing projects come to life. The three programs have the same first year. At the end of first year, students may switch programs if they desire. Graduates of the Electronics Engineering Technician program are able to assemble, install, maintain, test, troubleshoot and calibrate electronic circuits and systems. Their strong hands-on skills, backed up by solid electronics knowledge, enable them to take on many roles in the industry. The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category.The Electronics Engineering Technician program has been recognized by the Royal Canadian Navy and now qualifies for Canadian Armed Forces skill recognition. Students who graduate from this program will receive advanced standing as a Weapons Engineering Technician in the Royal Canadian Navy (subject to successful enrolment in the Canadian Armed Forces).

The Bachelor of Engineering - Mechanical Systems Engineering (MSE) program, delivered at the honours level, is accredited by the Canadian Engineering Accreditation Board (CEAB) allowing graduates to become professional engineers after completing their mandatory work experience and writing a professional practice exam.The program integrates a rich blend of interdisciplinary topics covering mechanical, industrial and control engineering to enable graduates to design complex computer-controlled mechanical systems. Automated manufacturing systems, comprised of mechanical components, conveyors, electrical and pneumatic actuators, sensors and robots are examples of such mechanical systems.The MSE program is delivered in a unique project-based curriculum model allowing students to learn by doing while developing strong skills in business methodologies, project management, environmental protection and interpersonal and team dynamics. As they work on increasingly complex projects, students progress from the technical fundamentals to advanced leading technologies in design, manufacturing and automation. This project work, combined with twelve months of paid co-op opportunities, thoroughly prepares MSE graduates for a successful career in a variety of engineering fields.

This unique 2-year program prepares you to enter the workplace with exceptional welding skills that employers are seeking. There is an identified gap in the workforce for qualified graduates needed to operate and troubleshoot robotic welding systems while having maintenance, welding and robotic programming knowledge. This program is aimed at motivated individuals looking for a challenging and rewarding career in manufacturing automation. You will earn a Welding Engineering Technician - Robotics diploma and will acquire comprehensive welding skills through hands-on practical labs, using the latest equipment. You will create and read blueprints and gain an understanding of metals and their characteristics, complemented by solid welding automation knowledge and welding robot programming. Safe work practices and practical experience in weld inspection methods are also covered. The optional co-op stream includes one co-op work term. 

Program Outcomes

• Perform safe work practices in the welding trade in accordance with the Occupational Health and Safety Act (OHSA) and Regulations for Industrial Establishments.
• Interpret and prepare drawings and other technical documents that meet appropriate engineering standards in the manufacturing industry.
• Perform trade related mathematical calculations including volume, area, estimation, geometry, ratio, measurement, weights, loads, and centring of various lifts to complete projects safely and accurately.
• Perform practical welding operations using appropriate tools, materials and processes that are specific to automated welding production and meet industry and quality standards and appropriate codes.
• Complete projects using appropriate materials, arc welding processes, and consumables that meet industry standards and codes.
• Recommend quality improvements to correct common weld defects and faults found using destructive and non-destructive examination and testing methods.
• Troubleshoot technical problems related to welding automation processes in order to recommend solutions for repairing and maintaining equipment to industry standards.
• Use various computer software and programming applications to accurately communicate welding specifications to the automated welding and manufacturing personnel.
• Select, program and develop specifications for robotic and automated welding and joining systems that meet quality standards and applicable codes.

Applying to the Co-op Stream
All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op
Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
To be considered for admission to the co-op stream, students are required to achieve a minimum 65% in Level 1 and a maximum of one dropped or failed course.
Co-op Information

• Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages.
• The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
• Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.

Increased concern regarding the protection and management of the environment has resulted in the environmental field becoming one of the future-facing industries in Canada and abroad. This graduate certificate program meets the demand for trained technologists and environmental scientists in the areas of brownfield redevelopment, environmental monitoring, regulatory compliance and enforcement. It was developed in consultation with representatives from the environmental industry. The program is reviewed and updated by a Program Advisory Committee comprised of practitioners from the consulting, manufacturing, and public sectors.For qualified college or university graduates, this program enhances existing skills and competencies. The training provided prepares graduates to act as key players in responding to today's environmental challenges. Studies focus on the application of current engineering and scientific principles to protect and manage the environment in the following areas:- environmental monitoring and investigations- environmental auditing and assessment- management and clean up of contaminated sites- environmental enforcement and regulations- solid and hazardous waste management- 40-hour HAZWOPER training- water quality- air quality monitoring and permittingGraduates will be prepared to write Ministry of Environment Operator in Training (OIT) and Water Quality Analyst (WQA) licensing exams. Classroom instruction will be complemented by environmental monitoring training in the field, visits to solid-waste and industrial facilities, health and safety training, and visits to sites undergoing environmental investigations or clean up. The 40-hour HAZWOPER training course is offered as part of the program curriculum. During the completion of a term project, students are provided with mentoring advice from practicing environmental engineers, technologists, and scientists. The optional co-op stream includes one co-op work term.

This full-time graduate certificate program will help prepare graduates with a previous technical degree or diploma for engineering work in the industrial automation sector. The program offers key practical courses similar to those found in our highly successful Robotics and Automation Technology program. The optional co-op stream includes one co-op work term instead of the Guided Career Management course.

Program Outcomes

• Control automated manufacturing components and systems though the influence of configuration, programming selection, and connectivity.
• Create new, and interpret existing two and three dimensional CAD models of parts and assemblies for automated manufacturing systems
• Produce three dimensional CAD animations to simulate machine motion and operations
• Determine safety requirements of robotics and automated systems and apply them to the design of components and systems
• Work with appropriate measuring devices, and data acquisition systems to record information and measurement for analysis and interpretation.
• Analyze and communicate technical information effectively to a variety of audiences using various media and methods.
• Apply professional conduct while engaged in academic and practical activity in the classroom and during the co-op work term.

Applying to the Co-op Stream

• All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
• To be considered for admission to the co-op stream, students are required to achieve a minimum 80% session weighted average with no dropped or failed courses.

Co-op Information

• Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages
• The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
• Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.
• Students who are not eligible for co-op or do not secure a co-op work term by the start of the work term semester will be offered the option to enrol in the 15 credit Career Management in Canada GCM8000 co-op alternative. This co-op alternative involves one 3 hour on campus session per week and 12 hours per week of online and out-of-class activity.
• If GCM8000 is selected, the student must attend sessions from the first session of the term and cannot transfer back into the co-op stream.
• GCM8000 may be delivered at the Doon, Waterloo, or Cambridge campus.

This program provides a pathway to popular School of Engineering technology programs and has been designed with student success in mind. With attention to fundamental academic skills, students develop academic readiness and are provided with opportunities for guaranteed admission to a range of engineering technology (diploma) programs.A variety of technology disciplines are incorporated, enabling students to make informed choices about career paths in technology. The curriculum is designed to provide a balanced education in applied mathematics, physics, introduction to technology, communication, computer applications, career development, and general education. Students will have an opportunity to acquire the knowledge and skills necessary to prepare them for the challenges of higher education in the technology field. One course in each semester is dedicated to introducing students to a wide variety of engineering technology disciplines through hands-on activities and speakers from these fields.Graduates are guaranteed entry into the next first-year intake of a specified engineering technology program provided they have simultaneously applied through www.ontariocolleges.ca, earned all credits and have achieved a minimum program average of 65%, including a minimum 65% average of both math courses.
 

In this diploma program, students gain skills for a career in today's automated manufacturing setting. In addition to developing a thorough knowledge of numerically controlled manufacturing systems, students will acquire a comprehensive background in general manufacturing and design fundamentals. This broad?based curriculum includes: learning and applying numerical control (NC) programming concepts; utilizing CAD/CAM techniques to integrate design and manufacturing; an introduction to the world of robotics; an introduction to designing power-transmitting devices and developing and applying quality assurance process planning and production control techniques to the solution of practical manufacturing problems. Today's effective technician is also a skilled communicator, and students will learn to communicate technical information at all levels through the use of linguistic, graphic and computerized methods. There is a common first two years with the Mechanical Engineering Technology (Automated Manufacturing) program. The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category.The optional co-op stream includes two co-op work terms.

This program is built on the newly identified Communication Infrastructure Engineering (CIE) discipline, which is defined by the Professional Engineers of Ontario (PEO) Council at a high level as the systems-level architecture, design, and management of trusted networks for mission-critical and safety-critical applications, including those that support other critical infrastructures. If you are interested in combining elements of the more traditional disciplines of Communications Engineering, Computer Engineering, and Software Engineering to achieve Cyber-Security from an Engineering rather than an Information Technology perspective, this program is the right choice. This Bachelor of Engineering - Cyber Systems Engineering program focuses on real-time systems, communications, networks, and risk management.

This program prepares graduates with degrees or diplomas in telecommunications, electronics, or computer engineering/technology for work in emerging fields in the wireless telecommunications industry. Students will enhance their undergraduate knowledge with practical skills that include the use of industry standard tools (drivetest tools, propagation tools, spectrum analyzers, network analyzers, etc.), and the techniques required for success in the wireless industry. Students will broaden their familiarity with troubleshooting and the configuration of local area and wide area networks (LANs and WANs) and networking topics relevant to telecom carriers including virtual private networks, quality of service, and others. Cutting-edge topics which include long term evolution (LTE) and 5th generation wireless networks, high bandwidth wireless (WiGig+) and concurrent MIMO systems, will ensure that graduates will be in high demand.