Certificate in Heavy Duty Equipment Mechanic

at Red River College Polytechnic - Notre Dame Campus Canada

Overview

This is an entry-level program that develops the basic knowledge and skills you need to perform routine maintenance and repairs to vehicle systems and components. The program is designed to prepare you to adjust, service, and repair a variety of heavy mobile equipment, usually diesel powered, used in construction, agriculture, or highway transportation. The work will involve basic servicing to engines and related equipment, and performing repairs. This will include transmission servicing, hydraulic/air brakes, and basic electrical in heavy duty application.

Emphasis during training will be on practical projects. Most of your training will take place at the College in the diesel mechanics workshop, a work environment designed to provide the practical experience you will need to find a job. You will spend approximately 60 percent of your training hours doing practical work on engines, standard transmissions, automatic transmissions, basic electric, basic brake systems, and servicing of equipment.

A number of related trade courses such as arc and gas welding, mathematics, science, and communications are included in the program. Theory grades are determined by examinations in each course, while practical evaluations are determined from each instructor's practical assignments.

Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

Read More

30

Application Processing Days

Under Graduate

Program Level

Fact & Figures

Full Time On Campus

Study Mode

12

Duration

Red River College Polytechnic - Notre Dame Campus

Location

Certificate in Heavy Duty Equipment Mechanic Assistant Fee

$17739

Tuition Fee

$11000

Average Cost of Living

$150

Application Fee

Certificate in Heavy Duty Equipment Mechanic Admissions Requirements

  • Minimum Level of Education Required: To be accepted into this program, applicants must have Grade 12 / High School Diploma.
  • Submit proof of graduation from or enrolment in Grade 12, including one credit in each of the following:
    • Grade 12 English
    • Grade 12 Math
    • Grade 10 Science
plane

Get superfast admissions at top Certificate in Heavy Duty Equipment Mechanic institutes in 2024

Benefits of choosing

edmission

Admission’s guaranteed at Top institutes across the world.

Enjoy exclusive application fee waiver’s with Edmissions.

Unlimited FREE Counselling sessions with Edmission’s Experts

Get Tips from industry veterans to crack the IELTS exam in 1 week.

Assistance with scholarships, loans, forex, student accommodation and visa guidance.

Where would you like to study*

Work Permit Canada

Students who wish to work in Canada require a work permit to do so. A student in Canada can work part-time during the course of his studies and full-time during holidays and semester breaks and post the completion of their course/program.

Rules for getting a part-time work visa in Canada

You can also work part-time on campus at your university.

Work Permit

Duration

Your part-time work permit will be valid for as long as you have a valid study permit.

Working Hours

20 Hours/Week

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

List

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

Study Permit

You will need a Social Insurance Number (SIN) to Service Canada. if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

You can work part-time off-campus if you are studying in the Quebec province.

Duration of Work Permit Canada

Your part-time work permit will be valid for as long as you have a valid study permit.

Work Hours Canada

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

You will need a Social Insurance Number (SIN) to Service Canada if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

Working after completing your course

In Canada, you will need a work permit to get a full-time job in Canada after finishing your studies. You chose a work permit like the Post-Graduation Work Permit (PGWP) if you wish to stay back in Canada and work full-time.

Visit Government of Canada Website for more detail

Post-Graduation Work Permit (PGWP)

The Post- Graduation Work Permit (PGWP) allows you to work for three years in Canada if you have completed a two years degree or more.

Application

how can i apply

You can either apply online or download the form and mail the application along with the required documents. Pay your fee and then wait for the decision to come.

Application Documents Required

List

To apply for the work visa, you need a degree from a recognized and accredited Canadian University along with an intention to stay and work in Canada only temporarily.

When to Apply?

One can apply for the full-time work permit in the first three months post the completion of their course during which the study permit is still valid.

How long does it take?

90 days

You will have to wait for 90 days for the decision on your work permit.

Duration

3 Years

The work permit is valid for 3 years if you have completed a two years degree program or more.

Fees

CAD 255

The fee for the work permit is CAD 255 plus the holder fee and the work permit processing fee.

Monthly Wages

CAD 1,600

An applicant is guaranteed a minimum salary of CAD 1,600 per month while working in Canada. This amount though varies on the job and the province you are working in.

Work Hours Canada

No Limit

There is no maximum limit, and you can work for as many hours as you want on the full-time work permit.

Required Documents

List

To apply for the work visa, you will need the following documents:

  • Forms: IMM 5710, IMM 5476 and IMM 5475;
  • Graduation Proof
  • Proof of payment of work permit fees
  • Copies of your travel and identification documents, passport pages and current immigration document.

Till a decision is made on your work visa, you can continue to work full time. All you need to have is your completed degree, should have applied for the permit before the expiry of your study permit and you should be allowed to work off-campus.

Information

Disclaimer

The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

Detailed Program and Facts

30

Application Processing Days

Full Time On Campus

Program Intensity

Under Graduate

Program Level

12

Duration

Study Visa

Student Visa For Canada

Any student who wishes to study in Canada requires a student visa. Some of the essential information for the application process is given below.

When Should I Apply?

4 to 6 months

Ideally, one should apply for the study permit at least 4 to 6 months before the commencement of your course/program.

Bank Account

No Need!

There is no need for a blocked bank account to apply for a student visa to Canada.

Duration of visa

Course Duration + 3 Months

The student visa is valid for the entire period of your course plus three months.

Time to Wait for Visa

35 Days

It takes time. It might take up to 35 days post your interview for the application process to complete and for you to finally receive your visa.

Appointment

Required

It varies from applicant to applicant, but one may have to take part in one or two visa appointments, namely a medical examination and a visa interview.

How you can apply

Application Process

An applicant can either apply online or offline by visiting a visa application centre and submitting their documents. After the analysis of your application, you might be called for an interview.

Fee

Visa Fee

The visa application fee for Canada is CAD 150.

Minimum Funds

833 CAD, 917 CAD

You require a minimum monthly amount to be deposited into your account to prove that you can sustain yourself while studying in Canada. If you are studying in Quebec, you need to have a monthly minimum of CAD 917, and if you are studying in a province except for Quebec, you need to have a minimum of CAD 833 per month.

Any other expenses

Required

You will have to pay a medical examination fee and a visa application service fee to the tune of CAD 15 if you visit a visa application centre to apply for your visa.

Medical Examination

Required

One has to undergo a series of medical examinations to be deemed fit for a student visa of Canada. The tests mostly include blood and urine tests, chest x-rays and other organ checkups.

Language Skills

Not Required

one doesn’t need to prove their language skills in applying for a Canadian Visa.

Disclaimer: The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

English Test Requirement

6.5

Minimum Overall Score

6.5

Minimum Listening

6.5

Minimum Reading

5.5

Minimum Writing

6.5

Minimum Speaking

77.0

Minimum Overall Score

Other Courses by Red River College Polytechnic - Notre Dame Campus,Canada

Engineering & Technology

Diploma in Automotive Technician

This program supplements the Automotive Technician Certificate program to develop the skills you need to work with advanced electrical and electronic systems in the automotive technician field.

Classroom instruction will broaden your knowledge in the automotive electronics area and will cover other advanced systems such as engine management, fuel injection, and ABS brakes.

This is not an apprenticeship program but may provide credit transfer opportunities for apprenticeship. The Government of Manitoba, Entrepreneurship, Training, and Trade offers apprenticeship training that combines on-the-job practical skills development with levels of technical training.

12 month

Duration

$ 17480

Tuition

Engineering & Technology

Diploma in Automotive Technology

The Automotive Technology program gives you the necessary skills required to diagnose and repair today’s automobile. Training alternates between in class, live shop and work experience. Classroom instruction will broaden your knowledge in automotive electronics as well as strategies required for diagnosis of engine management systems, fuel injection and abs brakes.

  • Main subject areas include electrical diagnosis, electronics, ignition systems, engines, drive-lines, steering and suspension, brakes and fuel system.
  • Second-year students will have the opportunity to be involved in chassis and engine dynamometer projects in areas of emissions analysis, cold weather testing of hybrid and electrical vehicles and engine performance.
  • Upon graduation, students will receive a level two apprenticeship accreditation

24 month

Duration

$ 17077

Tuition

This program provides you with the skills necessary to produce computer-aided mechanical drawings of components and assemblies of industrial machines, machinery parts, and other mechanical equipment.

You will hone your problem-solving abilities and drafting skills through practical assignments, where you must think through the process of drawing development. You will spend a significant portion of the program learning about and producing drawings using computer-aided drafting (CAD). You will receive training on a wide variety of software programs such as recent releases of AutoCAD, Solid Edge, and Inventor, to give you the experience required to develop technical drawings.

As the year progresses, you will be asked to demonstrate planning, research, and analytical abilities as you undertake project design work.

As a graduate, you will possess skills in the following areas:

  • Engineering drawings
  • Design for manufacturing
  • Computer operation
  • Basic manufacturing processes
  • Quality control inspection
  • Geometric dimensioning and tolerance
  • Metallurgy
  • Heat treatment

Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

12 month

Duration

$ 17379

Tuition

This post-graduate diploma program is designed to help students prepare for the Chartered Professional Accountants (CPA) Canada designation. The program was developed from the CPA competency map that provides graduates with the opportunity to fill current and ongoing demand for accountants. Graduates can apply to use their post-graduate diploma credits for standing toward the Chartered Professional Accountant (CPA) designation. Students will gain a deeper understanding of accounting practices and principles; accounting management; taxation; communications; business law as it relates to finances and accounting.

20 month

Duration

$ 16880

Tuition

Health Sciences, Nursing and Emergency Services

Diploma in Science Laboratory Technology (Co-op)

Consider this program if you want to work as a laboratory technologist in an industrial, government or commercial laboratory.
This program provides you with the applied skills required to succeed in a wide variety of professional scientific work environments. The course work emphasizes the application of standard and specialized laboratory techniques across scientific disciplines, ensuring you receive practical, job-ready experience; you will learn specialized skills in immunology, molecular biology, tissue culture and instrumentation.

In addition, the co-operative education component integrates related on-the-job training with classroom theory by alternating periods of paid employment and academic study.

Graduates find employment as technologists in many fields, including chemical analysis, research, quality assurance, pharmaceuticals and biotechnology.

CO-OP/Practicum Information
This program offers a co-operative education format that integrates classroom theory with on-the-job experience by alternating academic study with work placements. These paid work placements will provide you with first-hand knowledge of a working laboratory in industry and a chance to use your acquired skills.
This co-op program is divided into six terms, two of which are co-operative education work placements. The work placements are in Term 3 and Term 6, both of which run during May, June, July, and August. The program does not have summer breaks.

24 month

Duration

$ 16399

Tuition

The need for expertise in international business is growing in Canada. The International Business program prepares you to meet the challenges of adapting to the global marketplace.

Small classes are taught by a team of professionals who have real business experience. They offer innovative projects designed to apply international business theory through case study and discussion. You will be given opportunities to listen to guest speakers and to participate in relevant conferences, seminars, and other events.

Student teams will work with a local enterprise to prepare a marketing plan for entry into a new foreign market. Your plan will be evaluated by a panel of judges.

You will be required to complete a minimum six-week work experience component (assistance provided by RRC).  

12 month

Duration

$ 18368

Tuition

Civil Engineering Technology is a cluster of diploma programs that provides students with career training in construction engineering, environmental engineering, and geomatics technologies.

During the first year, you will acquire generic competencies in common core courses in the following areas:

  • Algebra and trigonometry (M)
  • Chemistry
  • Statics and strength of materials (M)
  • Surveying (M)
  • Technical communications
  • Computer applications
  • Technical drafting
  • WHMIS
  • General Safety Trainin

Important Advisory Note: Courses designated (M) are high in mathematical content.  If you have weak mathematical skills, or if you completed Essentials Math in high school (instead of the recommended Applied Math or Pre-Calculus Math), it is strongly recommended that you take the preparatory Mathematics for Technology course available throughout Continuing Education at RRC, prior to beginning the program.

Prior to starting the program, you will be invited to attend a program overview information session.  You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.  Although the diagnostic testing is optional, we strongly recommend that you participate.  Should your results be lower than a C (60%) you would benefit from taking the Mathematics for Technology course as a pre-program refresher.

After completion of the first year courses, you would then apply and develop these competencies during a six-month co-operative education work term.

In the second and third years*, you take more advanced courses and build on the competencies you gained in first year. The focus is on application and design. To enter into subsequent terms (both academic and co-op), and to graduate, you need a minimum cumulative term grade point average (CGPA) of 2.00.

24 month

Duration

$ 17734

Tuition

The Applied Accounting program is designed to provide you with the necessary skills to provide entry level accounting support. In addition to developing basic accounting and computer skills, the program includes courses in general business practices.  

While the program highlights accounting topics, emphasis will also be placed on:

  • Mathematics
  • Business management
  • Communication
  • Records management
  • Business software

8 month

Duration

$ 15894

Tuition

Take this program to gain a broad business background if you do not meet the admission requirements for the two-year Business Administration program. This three-year program will help you develop a potential for supervision, management, and leadership through the study of business-related programs and practical projects. With these foundations you may choose a career from a variety of job opportunities in the business community.

The modified pace in the first two years gives you additional time to upgrade your skills and knowledge and to meet your individual needs.  In the third year, you take courses along with students in the two-year Business Administration program.  Upon graduation you receive a Business Administration diploma.

36 month

Duration

$ 14283

Tuition

Prepare for a career as a Computer Numerically Controlled (CNC) machinist or general machinist.  Learn to set up and operate CNC and manual metal cutting machines, interpret engineering drawings, apply geometric dimensioning and use CAD software.

Graduates will be competent in the following:

  • Applying safe and correct practices when handling tools and equipment
  • Setting up and safely operating manual milling machines, lathes, and Computer Numerical Control (CNC) machining and turning centers
  • Interpreting engineering drawings
  • Applying geometric dimensioning to verify component parts
  • Using basic Computer Aided Design (CAD) software
  • Studies consist of theory and practical training.

Graduates of the program may find career opportunities as CNC operators or machinist apprentices in a wide variety of industries including:

  • Aerospace
  • Medical research
  • General manufacturing
  • Repair
  • Mining
  • Transportation manufacturing
  • Research and development

12 month

Duration

$ 17326

Tuition

View All Courses by Red River College Polytechnic - Notre Dame Campus, Canada

Top Study Abroad Exams

GRE Exam

The Graduate Record Exam (GRE) is a necessary and popular enteryway exam that learners must pass in order to be acc.. Red More

GMAT Exam

The Graduate Management Admission Test (GMAT) is a well-know evaluation for being accepted into MBA programs. Per... Read More

SAT Exam

The SAT is a Standardized evaluation that is necessary for enrolling in underaduate cur... Read More

Popular Universities to Study Abroad

Study in Canada
Study in USA
Study in UK
Study in NZ
Study in India
Study in UAE

Explore Colleges and Courses in Canada

Popular States
Popular Cities
Popular Streams

Latest Blog Posts

Trending Blog Posts

edmission

Search, Shortlist, Apply and get accepted! It’s that Simple to pursue your dream to Study abroad with Edmissions. Our team of experts provide you the right guidance that helps you to take admission in your dream college in countries like Canada, the USA, the UK

© 2021-2024 Edmissions - All rights reserved.

TALK TO OUR EXPERTS

whatsapp