Graduate Certificate in Operations Leadership - Food Manufacturing

at Conestoga College - Cambridge Campus Canada

With the focus towards a lower-carbon future, energy professionals are in high demand. This three-year program is specifically designed to meet the high demand for engineering technologists in electrical power generation, transmission, and distribution, as well as in low-carbon energy systems, smart building systems, and energy management.Topics include conventional and renewable energy generation, including distributed energy resources for Ontario’s low-carbon energy future. Students will develop a strong electrical engineering technology foundation in electrical fundamentals, motors and control, programmable logic controllers, power system generation, transmission/distribution, protection and control, and grid transformation/smart grids. In addition, topics such as residential/commercial/industrial energy savings, building automation, analytics, energy storage, HVAC systems, and energy auditing are applied for careers in the growing specialty of conservation in private and public sector jobs. Mechanical topics include statics, dynamics, thermodynamics, and fluid mechanics as they apply directly to various energy systems.Throughout the program, students gain applied experience in AutoCAD and Revit, safety practices, safety standards and equipment, technical writing, and project management. Theory is applied practically in many laboratory settings.Strong industry support is evidenced by the program's high employment rate and successful optional co-op stream. Students benefit from the well-established, high-quality labs, relevant field trips, and active industry mentorship. Faculty have current, specialized credentials and are well-connected with industry to assist with graduate employment. Students enjoy analyzing Conestoga’s on-site 250 [ton] geothermal heat pump system and associated 500 [kW] PV solar system as they witness the journey to net-zero emissions on campus.Graduates have developed an applied theory in both mechanical and electrical systems and, as a result, are uniquely prepared to perform technological functions in various aspects of electrical, power, and energy fields for the exciting growth in Ontario’s low-carbon and smart-energy future.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.The optional co-op stream includes four consecutive four-month work terms.

This program prepares graduates with degrees or diplomas in telecommunications, electronics, or computer engineering/technology for work in emerging fields in the wireless telecommunications industry. Students will enhance their undergraduate knowledge with practical skills that include the use of industry standard tools (drivetest tools, propagation tools, spectrum analyzers, network analyzers, etc.), and the techniques required for success in the wireless industry. Students will broaden their familiarity with troubleshooting and the configuration of local area and wide area networks (LANs and WANs) and networking topics relevant to telecom carriers including virtual private networks, quality of service, and others. Cutting-edge topics which include long term evolution (LTE) and 5th generation wireless networks, high bandwidth wireless (WiGig+) and concurrent MIMO systems, will ensure that graduates will be in high demand. 

The Power Systems Engineering (PSE) program is a four-year Bachelor's degree designed to meet the demand for engineers in the rapidly evolving electrical power sector. This program provides a study of electrical power engineering, trans-disciplinary engineering of renewable energy generation, and smart-grid and energy conservation technologies. The program provides a solid foundation in mathematics, science, and engineering theory, and gradually builds practical and engineering design skills as well as a full spectrum of employability skills through its project-based learning approach and paid co-operative education.

The Bachelor of Engineering - Building Systems Engineering (BSE) program is one of the newest engineering degrees offered in the School of Engineering delivered at the honours level. Unique in Canada, this paid co-op program explores the present and future of modern buildings and their increasingly complex operational systems. The BSE program targets motivated individuals looking for challenging careers in design and integration of building systems, energy and utilities management, building operations and facilities management. Delivered using a project-based learning environment, the BSE program allows students to solve real-world problems by integrating mechanical, electrical and control engineering knowledge with environmental, business, project management concepts and team dynamics skills. The twelve months of paid co-op opportunities, strategically integrated with academic semesters, enhance students’ skills and job readiness. Graduates will be able to pursue a professional engineering career through licensing with Professional Engineers Ontario.

This program provides training for those interested in a career as a food processing technician in the food and beverage manufacturing industry. It includes courses on industrial maintenance, drawings and schematics, machine technology, pumps, valves, motor controls and PLCs, as well as an introduction to food science, food processing methods, food safety and an overview of the principles of food manufacturing. All theoretical training is supported by hands-on experience in mechanical shops and a food processing pilot plant. Students in the Food Processing Technician program will receive training in mechanical systems and industrial maintenance as they apply to a food manufacturing operation and will have intensive hands-on mechanical experience with food processing equipment.The optional co-op stream includes one co-op work term instead of the Guided Career Management course.

Applying to the co-op stream

• All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Not every student who meets academic eligibility requirements will be admitted to the co-op stream.
• To be considered for admission to the co-op stream, students are required to achieve a minimum overall 70% session weighted average in Level 1 with no dropped or failed courses.
• International students will require work permits to utilize the co-op job board for job search and to accept employment. Students are currently experiencing longer than usual wait times for work permits. Please be advised that there will be no co-op program service fee refunds after the program withdrawal for refund date. Students that have not received their work permit and choose to remain in co-op after the program withdrawal for refund date do so at their own risk and will not be refunded. If you are concerned about receiving your work permit in time to achieve co-op employment, please discuss your situation with your co-op advisor as early as possible.

This one-year full-time Ontario College Graduate Certificate program is designed for students who have completed a degree or diploma in science or engineering, and who want to pursue for a supervisory position in the food manufacturing industry. The program offers a suite of courses designed to developskills and knowledge with direct applicability in the food manufacturing environment. You will integrate leadership concepts in communication, problem-solving and decision-making. Course materials will be applied in a food manufacturing pilot plant environment and students will be exposed to operations in local industries. You will use continuous improvement including lean six sigma, project management, equipment maintenance, food safety and quality assurance to design systems that lead to excellence in manufacturing.

The Bachelor of Engineering - Mechanical Systems Engineering (MSE) program, delivered at the honours level, is accredited by the Canadian Engineering Accreditation Board (CEAB) allowing graduates to become professional engineers after completing their mandatory work experience and writing a professional practice exam.The program integrates a rich blend of interdisciplinary topics covering mechanical, industrial and control engineering to enable graduates to design complex computer-controlled mechanical systems. Automated manufacturing systems, comprised of mechanical components, conveyors, electrical and pneumatic actuators, sensors and robots are examples of such mechanical systems.The MSE program is delivered in a unique project-based curriculum model allowing students to learn by doing while developing strong skills in business methodologies, project management, environmental protection and interpersonal and team dynamics. As they work on increasingly complex projects, students progress from the technical fundamentals to advanced leading technologies in design, manufacturing and automation. This project work, combined with twelve months of paid co-op opportunities, thoroughly prepares MSE graduates for a successful career in a variety of engineering fields.

Graduates from the Electronics/Computer/Telecommunications Engineering Technician/Technology programs work with electronic, computer and communications equipment and systems. They are technical experts and problem solvers. Many of our graduates report that they enjoy the creative aspects of the job and seeing projects come to life. The three programs have the same first year. At the end of first year, students may switch programs if they desire. Graduates of the Electronics Engineering Technology program are able to design, build, test and repair a communications system or any part of one. Their very strong electronics knowledge and skills enable them to take on many roles in industry. They have particular strength in digital signal processing, as well as with circuits operating at microwave frequencies. Since embedded computer chips can replace electronic components, graduates are able to implement a given circuit function either in software or with physical parts. Graduates have a strong mathematical background and interpersonal communication skills. Since the program is approximately half lab work and half theory, graduates have a particular advantage in the practical implementation of systems, software and circuits. The optional co-op stream includes four consecutive four-month work terms.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.The Electronics Engineering Technology program has been recognized by the Royal Canadian Navy and now qualifies for Canadian Armed Forces skill recognition. Students who graduate from this program will receive advanced standing as a Weapons Engineering Technician in the Royal Canadian Navy (subject to successful enrolment in the Canadian Armed Forces).

Graduates from Electronics/Computer/Telecommunications Engineering Technician/Technology programs work with electronic, computer and communications equipment and systems. They are technical experts and problem solvers. Many of our graduates report that they enjoy the creative aspects of the job and seeing projects come to life. The three programs have the same first year. At the end of first year, students may switch programs if they desire. Graduates of the Computer Engineering Technology program are able to design, build, test and repair a computer-based system or any part of one. Their very strong electronics knowledge and skills enable them to take on many roles in industry. Their strength in hardware, mathematics and theory equips them to interface with the physical world. Because of the power of embedded processor chips, they are used to simplify (and make less expensive) most non-trivial equipment and systems. (Fuel injection and pollution control for automobiles is a classic example). Our graduates design, build and test the computer part of such systems. Their strong mathematical background and interpersonal skills equip them to work as part of an engineering team. Since the program is approximately half lab work and half theory, graduates have a particular advantage in the practical implementation of systems, software and circuits. The optional co-op stream includes four consecutive four-month work terms.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.The Computer Engineering Technology program has been recognized by the Royal Canadian Navy and now qualifies for Canadian Armed Forces skill recognition. Students who graduate from this program will receive advanced standing as a Weapons Engineering Technician in the Royal Canadian Navy (subject to successful enrolment in the Canadian Armed Forces).

The Bachelor of Engineering - Electronic Systems Engineering (ESE) program, delivered at the honours level, is accredited by the Canadian Engineering Accreditation Board (CEAB) allowing students to start on the path to becoming a professional engineer. It is a unique, project-based, paid co-op program that allows students to apply the high level of theory they learn to interesting, real-world projects. It is geared to motivated individuals looking for challenging careers in the dynamic and fast-paced world of digital and analog electronics, embedded systems, software, signal processing, and communication systems.