Diploma in Health Information Management

at Red River College Polytechnic - Notre Dame Campus Canada

This program supplements the Automotive Technician Certificate program to develop the skills you need to work with advanced electrical and electronic systems in the automotive technician field.

Classroom instruction will broaden your knowledge in the automotive electronics area and will cover other advanced systems such as engine management, fuel injection, and ABS brakes.

This is not an apprenticeship program but may provide credit transfer opportunities for apprenticeship. The Government of Manitoba, Entrepreneurship, Training, and Trade offers apprenticeship training that combines on-the-job practical skills development with levels of technical training.

Red River College’s full-time, online Administrative Assistant program focuses on the administrative and technical skills needed to meet the demands of the current and emerging office environment, both locally and internationally.

Skills learned in the program are immediately applicable in the workforce.

After successful completion of the program, you will be knowledgeable in a variety of technical and soft skills, including business office software, administrative procedures, communication, event planning and teamwork, bookkeeping and accounting, payroll and problem solving.

This is an entry-level program that develops the basic knowledge and skills you need to perform routine maintenance and repairs to vehicle systems and components. The program is designed to prepare you to adjust, service, and repair a variety of heavy mobile equipment, usually diesel powered, used in construction, agriculture, or highway transportation. The work will involve basic servicing to engines and related equipment, and performing repairs. This will include transmission servicing, hydraulic/air brakes, and basic electrical in heavy duty application.

Emphasis during training will be on practical projects. Most of your training will take place at the College in the diesel mechanics workshop, a work environment designed to provide the practical experience you will need to find a job. You will spend approximately 60 percent of your training hours doing practical work on engines, standard transmissions, automatic transmissions, basic electric, basic brake systems, and servicing of equipment.

A number of related trade courses such as arc and gas welding, mathematics, science, and communications are included in the program. Theory grades are determined by examinations in each course, while practical evaluations are determined from each instructor's practical assignments.

Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

This program trains you for entry-level employment as an engineering technologist in the electrical industry, which provides a broad range of employment opportunities. You develop the conceptual knowledge base and troubleshooting skills to prepare you for a range of roles that include design, installation, maintenance, production, and technical sales and support.

Topics in the program include:

• Use and application of programmable logic controllers (PLCs), variable frequency motor drives (VFDs), soft starters, and data communication to link all of the preceding elements for the control of manufacturing systems.
• Planning, designing, and specifications of power systems with motor protection for buildings and industrial plants. You will generate AutoCAD drawings, calculate short circuit currents, and coordinate fuses, circuit breakers, and protective relays. Canadian Electrical Code instruction is delivered by journeyman electricians.
• Hydro electric power generation, transmission, and distribution systems with a view to operation, control, and protection.
• Assessment of power system harmonics concerns by measuring TDD and THD and offering solutions to improve performance.

Co-op/Practicum Information
Co-operative education integrates classroom theory with related on-the-job-training by alternating terms of academic study and employment.
This program offers a co-operative education stream to give you direct industry experience, introduce your abilities to local employers, and help finance your schooling. 
Year 1 includes an optional co-op work term. Year 2 includes a mandatory co-op work term. Only students enrolled in the first or second year of Electronic, Electrical or Instrumentation Engineering Technology are eligible to enrol in the co-op work term.

Note: First year of the program will be held at the Exchange District Campus before transferring to the main Notre Dame Campus for the rest of the program.

The Architectural Technology diploma program is a comprehensive, two year, direct entry program consisting of four 16-week semesters. You will complete a four month co-operative work term between year one and year two that will provide you with related and practical experience in the fields of architecture, engineering, and construction. Upon graduation from the program, career options available to you may include working with:

• Architects or Engineers
• Interior Designers
• Home Builders
• Contractors
• Fabricators

In the Architectural Technology program, you will experience a wide-ranging curriculum of courses that emphasize the learning and practical application of current design and constructions techniques. You will take advanced courses and build on competencies gained as you move from semester to semester. Courses include subjects such as:

• Building Information Modelling
• Architectural Detailing
• Building Science
• Structural Systems
• Codes and Standards
• Project Management
• Specifications and Contract Administration
• Green Building and Sustainability

Co-op work experience

• 4 month co-op work experience between year one and year two

Gain the knowledge and skills needed to work in therapeutic and leisure recreational programming and services for older adults. You will learn to plan, promote, deliver and evaluate effective programs for clientele in various settings, including: personal care homes, extended hospital care, adult day centres, assisted living and other community based programs.

Workplace safety, privacy and health regulations are key components of the program. You will be taught by industry-experienced instructors through integrated workplace experience and two field work placements.

Health Care Aide

• This program develops the knowledge and skills you need to become a health care worker who, under the supervision of a nurse, assists hospital patients, personal care home residents, or home care clients. Health care aides help people to remain independent by assisting them with their physical, emotional, and social needs and their daily activities.
• You will learn about the expectations and responsibilities of the role and the knowledge and skills required to be a health care aide. You will study related topics including interpersonal communications, growth and development, gerontological care, and home care.
• You will have opportunities to gain experience in simulated laboratory settings at the College and in actual practice settings in health care agencies.

Health Unit Clerk
Take this program to acquire the knowledge and skills required to function as part of a health care team.

• Learn the roles and responsibilities of a Health Unit Clerk (HUC), including:
  • Maintaining patient and unit records
  • Processing physician orders
  • Processing diagnostic and laboratory orders
  • Managing unit supplies

Civil Engineering Technology is a cluster of diploma programs that provides students with career training in construction engineering, environmental engineering, and geomatics technologies.

During the first year, you will acquire generic competencies in common core courses in the following areas:

• Algebra and trigonometry (M)
• Chemistry
• Statics and strength of materials (M)
• Surveying (M)
• Technical communications
• Computer applications
• Technical drafting
• WHMIS
• General Safety Trainin

Important Advisory Note: Courses designated (M) are high in mathematical content.  If you have weak mathematical skills, or if you completed Essentials Math in high school (instead of the recommended Applied Math or Pre-Calculus Math), it is strongly recommended that you take the preparatory Mathematics for Technology course available throughout Continuing Education at RRC, prior to beginning the program.

Prior to starting the program, you will be invited to attend a program overview information session.  You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.  Although the diagnostic testing is optional, we strongly recommend that you participate.  Should your results be lower than a C (60%) you would benefit from taking the Mathematics for Technology course as a pre-program refresher.

After completion of the first year courses, you would then apply and develop these competencies during a six-month co-operative education work term.

In the second and third years*, you take more advanced courses and build on the competencies you gained in first year. The focus is on application and design. To enter into subsequent terms (both academic and co-op), and to graduate, you need a minimum cumulative term grade point average (CGPA) of 2.00.

This program prepares you for a career as a manufacturing technician with knowledge of manufacturing processes including conventional machining and metal forming operations, composites, and advanced manufacturing methods.

Heavy emphasis is placed on:

• Computer Numerical Control (CNC) machine operation and programming
• Computer Aided Design (CAD)/Computer Aided Manufacturing (CAM)
• Jig and fixture design

The program also gives you an introduction to robotics and automation, non-destructive testing, dimensional metrology, and quality inspection methods.
Upon completion of the program you will receive a Manufacturing Technician Diploma.
Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

This degree program focuses on the management skills needed in heavy, industrial and commercial, and residential construction. Consider it if you are looking to develop managerial expertise and are already working in areas related to  the skilled trades, engineering, or engineering technologies.

The program curriculum focuses on technology, science, leadership, and management. You will learn how to work effectively in all construction management settings. Program learning outcomes comply with codes, laws, and regulations while respecting sustainable environmental practices.

If your academic history includes any of the following, please visit me.rrc.mb.ca/Catalogue/Information/MyEducation for important information: post-secondary studies at an institution other than Red River College; Modified (M), English as an Additional Language (E), or GED high school courses; or home schooling.